::UtD::Undertaker

I take it that the setting is OK since no one has replyed! Thanks

Now that I have PB turn back on.. The choppy is back.. Are these settings ok.. or do you need to look at another .cfg file? Thanks!! ;Auto Generated by PunkBuster Server ; Some of the following settings may not apply, ; consult manuals at evenbalance.com for full documentation pb_sv_MsgPrefix "^3PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)] pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)] pb_sv_KickLen 2 //[Minutes (default=2)] pb_sv_CvarFreq 6 //[# of range checks per minute] pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither] pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists] pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)] pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 100 //[High screenshot filename serial #] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] pb_sv_AutoSsFrom 60 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss] pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)] pb_sv_ssLogging 0 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 0 //[seconds] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpKey "" //[Key] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_ScoreKick 0 //[Min score (negative)] pb_sv_ChangePeriod 999 //[seconds] pb_sv_ChangeMax 1 //[Max name changes allowed] pb_sv_DupNameGrace 0 //[seconds] pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)] pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" // pb_sv_HttpColBack2 "808080" // pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)] pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_UpdateGrace 600 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 1 //[seconds to wait before No GUID kick] pb_sv_AliasFn "" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists) pb_sv_load pbbans_hub.cfg pb_sv_task 0 3600 pb_sv_ver ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text] ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)] pb_sv_cvarempty ;PB UCON Settings / Lists pb_sv_usessionlimit 2 pb_sv_ucontimeout 300 pb_sv_uconempty pb_sv_uconadd 1 "63.171.64.245" "pbbans" "pbbans" pb_sv_uconignoreempty

WoW what a drawback.. Well I didnt notice any different and I sent in another ticket to gameserver to turn on PB again. I'll copy and paste my settings for you to look at and hope you see something there.. Thanks Fozzer...

I disable PB and I havent logon to see how my status is and I want to wait until I see other players on to see if there is a differents. But I just did a streaming status and its saying that my server isnt streaming.. Can you please check, thanks PBBans Hub Server Search Server Status: Server is not streaming via Hub Server Info Clan Tag: ::UtD:: Server IP: 8.3.5.225:28960 Last Streaming: May 16, 2007 12:28 pm Log Forwarding: None League Settings: None PBBans Options: None

I've notice since I installed PBBans that my server has been laggy and other players are saying the same thing and these are the players that play here alot.. Can this be from the streaming and if so how can I fix it, I dont want to remove it.. please help.. B)

If I wanted to add another CoD server, But I'm admins and this server is rented from one of my clan members and he want to know if I can add it to my account?

Before I installed PPBans Streamming.. I used RCON4COD to ban players from my server and there is a ban list from it. Is that going to mess anything up with the streaming? Can we still use RCON4COD to ban players on the spot?

I couldnt find on the forum on where you would find all screenshot taken by PPban? Also if I leave my ban list on the server from my Team while on the server would that still keep them off the server or would that mess up the streaming?

Thank you guys..... :)

When I logon to my server (COD) I get this: Warning: PB kicks for non-standard characters and all pb restrictions on the server What is this and how can I make it stop.... I dont know if other players can see it when I see it on my screen.. THKS :(

You are the MAN!!! Thks!! B)

Thanks Fozzer and I dont want to sound pickie but I notice a typo on my ::UtD::Undertaker\'s ? Should be ::UtD::Undertaker's - If thats not a typo by bad.. sorry..

On the genernate banlist its asking me: Include MD5 violations Include CVAR violations associated with known cheat files and the MD5 is already check, What is the differents and what would I pick for my server? Thks

Hub: 63.171.64.245 Game : Call Of Duty Clantag : ::UtD:: Clantag w/ color codes : ^1::^7UtD^1:: Hope this works!! :unsure: