Jump to content

(STRS) HEFFTY

Members
  • Posts

    20
  • Joined

  • Last visited

Everything posted by (STRS) HEFFTY

  1. For whatever reason, I am signed into the forums but I can't access my own account manager.
  2. For whatever reason, this server is not taking screenshots. I have openned up the SVSS file and nothing is in there. These are the settings I am using. Any help would be appreciated. // Universal Recommended BF2 Configs v1.4 // // PunksBusted: www.punksbusted.com // Respected Admins: www.respectedadmins.com // // PB server manual: http://www.evenbalance.com/publications/bf...ex.htm#settings pb_sv_MsgPrefix "PB Server" //[PB Message Prefix] // Increase MaxConDls on larger servers, particularly after new client updates pb_sv_MaxDlRate 3 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 5 //[concurrent downloads (default=1)] // Default kick length after a violation or restriction pb_sv_KickLen 2 //[minutes (default=2)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_Sleep 100 //[# of Milliseconds (default=60)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_LogCeiling 200 //[High log filename serial #] // If you are running a large and busy server, you will probably need to increase // pb_sv_SsCeiling or you may lose screenshots, depending on how often you review them pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 1000 //[High screenshot filename serial #] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] //pb_sv_SsPath "www.mattlavoie.com\twgclan\screenshots" //[Path where remote screenshots are saved] pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot] // You can alter the settings of SsWidth/SsHeight/SsXpct/SsYpct to capture // different areas/size of the screen. Change SsSrate for sample rate/quality. // Also, larger screenshots may cause a lower return rate - decrease the size // of the PBSS to increase the return rate and possibly less lag when // transferring screenshots for players // Larger screenshots, suggested by ultimate-EUS- //pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots] //pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots] //pb_sv_SsSrate 2 //[sample Rate for remote screenshots] // Smaller screenshots, should have a higher return rate pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] // These set the default locations for PBSS on the screen. By default, this is // overridden by the randomss.cfg file which changes the location regularly for // variations in screenshot location. pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] // Increase these delay values to reduce network load on clients pb_sv_AutoSsFrom 300 //[Minimum # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 1200 //[Maximum # of seconds to wait before requesting next ss] pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)] // PB Player Power (http://www.evenbalance.com/publications/bf2-ad/index.htm#playerpower) pb_sv_PowerMin 10 //[power points] pb_sv_PowerDef 1 //[power points] pb_sv_PowerKickLen 5 //[minutes (default=5)] // PB Webtool settings (http://www.evenbalance.com/publications/bf2-ad/index.htm#webtool) // Update with your server's IP, a free TCP port and key (password) //pb_sv_httpPort 0 //[port #, between 1 and 65536 - cannot conflict] //pb_sv_httpAddr "xxx.xxx.xxx.xxx" //[external IP Address] //pb_sv_httpRefresh 30 //[seconds] //pb_sv_httpKey "xxxxx" //[key/password] //pb_sv_httpMaps "dalian_plant dragon_valley gulf_of_oman mashtuur_city sharqi_peninsula strike_at_karkand //daqing_oilfields fushe_pass kubra_dam operation_clean_sweep songhua_stalemate wake_island_2007 zatar_wetlands" //[map //list (separate by spaces)] pb_sv_scoreKick -20 //[minimum game score (negative)] pb_sv_changePeriod 999 //[seconds] pb_sv_changeMax 1 //[max name changes allowed] pb_sv_dupNameGrace 30 //[seconds] pb_sv_autoUpdBan 1 //[0=No, 1=Yes (default=0)] pb_sv_extChar 1 //[0=No, 1=Yes (default=0)] pb_sv_guidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] // Load streaming settings (if pbsvlog.cfg exists) pb_sv_load pbsvlog.cfg pb_sv_load pbbans_hub.cfg
  3. Can u plz add this server to the Hub? Hub BF2 (STRS) Thanks, Heffty
  4. Can you link me to some information on how I can take screenshots and where I can access them on my computer? Also...how I can report things I do find. Thanks. Also, how do I know it's streaming? I mean, can I do a check within BF2cc to make sure it is streaming and if it stops what do I do?
  5. Ok, so I placed the following in my BF2cc as instructed. pb_sv_update ... wait 90 seconds pb_sv_writecfg pbucon.use pb_sv_restart ... wait 20 seconds pb_sv_task 50 3600 pb_sv_ver pb_sv_USessionLimit 2 pb_sv_AutoUpdBan 1 pb_sv_uconadd 1 63.171.64.205 pbbhub pbbhub pb_sv_writecfg All items were entered in pink under my log and at the end I clicked apply for good measure. You said server is not in Hub. So I dont' know if that's something you have to do or if I do it. If there is any further instruction I'll get on it. Thanks.
  6. Can u add this server to the Hub? Hub BF2 (STRS) I followed the FTP setup found here...http://www.pbbans.com/forums/index.php?showtopic=19266 I restarted but I had no clue how to test via rcon. Not sure what to do at this point or how to even use what I installed to catch hackers. Thanks
  7. Well this certainly isn't noob friendly help I can confirm that being a noob. step 3 Edit your pbsv.cfg and add this command line pb_sv_load pbbans_hub.cfg Where can I find the pbsv.cfg and why doesn't the help guide you link me to tell me where it is. I have no clue what that is, all of a sudden the steps just jump to Edit your pbsv.cfg and expects you to know what and where that is. I didn't even have a FTP program on my computer. In doing this I had to contact my server provider to get FTP access and do all kinds of crap. This is taking me forever. If you want a noob to catch a hack you're going to have to get alot more elementary than this. EDIT: Alright...I got this file off my server provider. I did not know I had to do that! So frustrating. Now in step 5 it tells me to go ot rcon or something but I have no idea what that is either. So much for this being easy to set up.
  8. My clan recently got sponsered and now has a 32 slot ranked server along with a 12 slot unranked server for matches. We were sponsered by FPS Gaming Communities and the fellow who provided me with these servers is CMDR Hawk. As I am relatively new to administrating servers and I would like to know how to catch hackers. I have seen screenshots of different hackers in here, but I don't know what exactly to look for or how to set my server up to take shots or be updated with the proper punkbusters stuff. I have updated it throug the control panel and that is about as far as I have gone. I would like to know where to start in these forums as to learning about how to spot hackers. Secondly, I have been having a problem playing BF2pro on some servers. I have gotten kicked via punkbuster for a MD5 tool check for the file vtuneapi.dll. Any help with that would be appreciated. Thank you, Heffty
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.