Rogu3granny

Okay so if it was 88.108.113.137 how would i enter it so that M.F.A would still be banned

I don't want to put my clanmembers ip on show but it is static as it doesnt change but i do know M.F.A ip changes like the weather bit the first two set always stay the same i.e. 88.108

Okay that works a dream but it is stopping one of our member joining the server also as he also has an ip starting with 88.108, is there a way i can allow him but still ban the M.F.A guy ??

okay here are my files where would i put it ;Auto Generated by PunkBuster Server ; Some of the following settings may not apply, ; consult manuals at evenbalance.com for full documentation pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)] pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)] pb_sv_KickLen 2 //[Minutes (default=2)] pb_sv_CvarFreq 6 //[# of range checks per minute] pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither] pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists] pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)] pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 100 //[High screenshot filename serial #] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "ftp://193.93.47.120/193.93.47.120_port_16567/pb/svss/" //[Path where remote screenshots are saved] pb_sv_AutoSsFrom 60 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss] pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)] pb_sv_ssLogging 0 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 0 //[seconds] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpKey "" //[Key] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_ScoreKick 0 //[Min score (negative)] pb_sv_ChangePeriod 999 //[seconds] pb_sv_ChangeMax 1 //[Max name changes allowed] pb_sv_DupNameGrace 0 //[seconds] pb_sv_AutoUpdBan 0 //[0=No, 1=Yes (default=0)] pb_sv_ExtChar 1 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" // pb_sv_HttpColBack2 "808080" // pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)] pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_UpdateGrace 2400 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 1 //[seconds to wait before No GUID kick] pb_sv_AliasFn "" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists) ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text] ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)] pb_sv_cvarempty ;PB UCON Settings / Lists pb_sv_usessionlimit 0 pb_sv_ucontimeout 300 pb_sv_uconempty pb_sv_uconignoreempty

So how can i enter this

On the 2142 my clan [E)S(D] are being stalked by a hacker which you can view form here: http://www.pbbans.com/mbi.php?action=5&ban_id=66671 http://www.pbbans.com/mbi.php?action=5&ban_id=65971 As you can see from the Alias the perpetrator is M.F.A http://www.2142-stats.com/M.F.A+stats.html we have tried to ban him from our server but he uses a keygen so is always changing his GUID as well as using a hack that makes 2142cc and in game console commands useless. We have contacted E.A. countless time but they fail to do anything This is just to show that [E)S(D] do not cheat but are unlucky enought to have a stalker for all the wrong reasons.

Cheers thanks for that

Yes we set that up and then i got a pm stating that your current IP does not appear on our banlist and your forum status is set as "member". Since then we have been able to set up the streaming criteria and have pm the admin to let them know but as of yet still no responce Server details are IP Address: 193.93.47.120 Port: 16567

I have set up Streaming on my 2142 server but have not had my account accepted even though i have pm admin 3 time can you help ??