Bandol Posted August 16, 2008 Share Posted August 16, 2008 Hi bin neu hier und wollte mal kurz nachfragen warum unser server nicht stream muss ich zum streamen 24 std warten?? hab soweit alles in der config bzw mit dem webtool gearbeitet das in der psv.cfg ; ------------------------------ ; Notes ; ------------------------------ ; Revision 1.1 ; PBBans.com Universal pbsv.cfg ; Can be used for all PB enabled servers ; ------------------------------ ; General Settings ; ------------------------------ pb_sv_MsgPrefix "^5PunkBuster Server" pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)] pb_sv_MaxSendRate 8 // [speed at which PB Server sends pbcl and pbag updates in KBps (default=8)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_DupNameGrace 0 //[seconds] pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)] ; ------------------------------ ; Other Settings ; ------------------------------ pb_sv_Restrictions 1 //[Kick for Restrictions 0=No, 1=Yes (default=1)] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_ChangePeriod 300 // For pb_sv_ChangeMax pb_sv_ChangeMax 5 // [Max name changes allowed in pb_sv_ChangePeriod] ex 5 changes in 300 seconds ; ------------------------------ ; Kick Settings ; ------------------------------ pb_sv_KickLen 5 //[Minutes (default=2)] pb_sv_ScoreKick 0 //[Min score (negative) ] pb_sv_UpdateGrace 2400 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 10 //[seconds to wait before No GUID kick] ; ------------------------------ ; PBSS Settings ; ------------------------------ pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 2000 //[High screenshot filename serial #] pb_sv_AutoSsFrom 300 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 300 //[seconds] ; ------------------------------ ; Web Tool Settings ; ------------------------------ pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpKey "" //[Password] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" // pb_sv_HttpColBack2 "808080" // pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)] ; ------------------------------ ; CVAR Settings (Only for supported games) ; ------------------------------ pb_sv_CvarFreq 3 //[# of range checks per minute] pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither] pb_sv_CvarWalk 2 //[0=disabled, 1-4=Walk through obtained Cvar lists] pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)] pb_sv_CvarChangedPulse 60 //[Frequency to auto-send CvarChanged (minutes)] ; ------------------------------ ; Alias Settings (Only for supported games) ; ------------------------------ pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] ; ------------------------------ ; PB Tasks (pb_sv_task [start delay (seconds)] [repeat (seconds)] [command]) ; ------------------------------ pb_sv_task 0 7200 pb_sv_ver // Keep-Alive for PBBans Hub pb_sv_task 0 86400 pb_sv_update // Check for PB updates daily ; ------------------------------ ; Badname List (pb_sv_badname [grace_period_secs] [disallowed text]) ; ------------------------------ pb_sv_badnameempty ;pb_sv_badname 10 server // Sample ; ------------------------------ ; IP Guard ; ------------------------------ ;pb_sv_ipguard 128.0.0.1 // Sample ; ------------------------------ ; Cvar List ; ------------------------------ pb_sv_cvarempty ; ------------------------------ ; Protected Tags ; ------------------------------ pb_sv_protecttag 1 PBSTAFF pb_sv_protecttag 1 PBBans ; ------------------------------ ; Load Ban List ; ------------------------------ pb_sv_banempty pb_sv_banload ; ------------------------------ ; Load IP Bans ; ------------------------------ ;pb_sv_banmask "128.0.0.1" // Sample ; ------------------------------ ; PB UCON Settings / Lists ; ------------------------------ pb_sv_uconignoreempty pb_sv_usessionlimit 9 pb_sv_ucontimeout 90 pb_sv_uconempty pb_sv_uconadd 1 64.27.21.46 "pbbanshub" "pbbanshub" ; ------------------------------ ; Exec Configs ; ------------------------------ pb_sv_load pbsvuser.cfg pb_sv_load pbsvlog.cfg und in der pbucon.use pb_sv_USessionLimit 8 pb_sv_uconadd 1 64.27.21.46 pbbanshub pbbanshub pb_sv_task 0 7200 pb_sv_ver pb_sv_task 0 86400 pb_sv_update pb_sv_AutoUpdBan 1 ist das alles richtig ??? bzw wo muss eigtl die clan-id rein ````?? f Quote Link to comment Share on other sites More sharing options...
Pisi-Deff Posted August 16, 2008 Share Posted August 16, 2008 Ja, alles richtig... Die clan-id muss net in das config. :) Quote Link to comment Share on other sites More sharing options...
Bombcat Posted August 17, 2008 Share Posted August 17, 2008 (edited) ; ------------------------------ ; Web Tool Settings ; ------------------------------ pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpKey "" //[Password] hier noch ausf Edited August 17, 2008 by Bombcat Quote Link to comment Share on other sites More sharing options...
Bandol Posted August 18, 2008 Author Share Posted August 18, 2008 ja aber laut server info von der seite ist der server unbekannt also kein stream woran liegt der fehler Server is not streaming to PBBans Server Info Server IP 194.97.167.70:16576 Game BattleField 2 Tag ~StS~ Quote Link to comment Share on other sites More sharing options...
Pisi-Deff Posted August 18, 2008 Share Posted August 18, 2008 Welche antwort kommt, wenn du durch rcon 'pb_sv_uconlist' machst? Quote Link to comment Share on other sites More sharing options...
Bandol Posted August 19, 2008 Author Share Posted August 19, 2008 Welche antwort kommt, wenn du durch rcon 'pb_sv_uconlist' machst? Laut Bf2cc das hier Custom Command Executed: exec pb_sv_uconlist Quote Link to comment Share on other sites More sharing options...
Bandol Posted August 19, 2008 Author Share Posted August 19, 2008 Ich vermute das ich noch in das team aufgenommen werden m Quote Link to comment Share on other sites More sharing options...
Pisi-Deff Posted August 19, 2008 Share Posted August 19, 2008 Ich kenn zwar BF2 net, aber ich glaub es sollte da kein exec geben. z.B. Custom Command Executed: exec pb_sv_uconlist Die antwort sollte so aussehen: ^3PunkBuster Server: [slot] [Type] [Mask] [Name] ^3PunkBuster Server: 1 1 64.27.21.46 pbbanshub ^3PunkBuster Server: End of PB UCON Profile List (1 Entry) Quote Link to comment Share on other sites More sharing options...
Bandol Posted August 19, 2008 Author Share Posted August 19, 2008 also wenn ich in der uco alles drin habe wo ist dann der hacken haben ein 4nteplayer server d.h vollzugriff auf die pb.cfg k Quote Link to comment Share on other sites More sharing options...
65th-Saruman Posted August 19, 2008 Share Posted August 19, 2008 Sollte keine probleme machen mit ggc. Aber unsere ucon sieht anders aus. ;PB UCON Settings / Lists pb_sv_usessionlimit 8 pb_sv_ucontimeout 300 pb_sv_uconempty pb_sv_uconadd 1 "64.27.21.46" "pbbanshub" "pbbanshub" pb_sv_uconignoreempty Quote Link to comment Share on other sites More sharing options...
65th-Saruman Posted August 19, 2008 Share Posted August 19, 2008 und so steht es in der datei die man hier runter laden kann ; ------------------------------ ; PB UCON Settings / Lists ; ------------------------------ pb_sv_uconignoreempty pb_sv_usessionlimit 8 pb_sv_ucontimeout 90 pb_sv_uconempty pb_sv_uconadd 1 64.27.21.46 "pbbanshub" "pbbanshub" also so wie bei dir oben habt ihr auch das bf2cc tool wenn ja dann probier es ma dar Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.