TA-Ratster911

i think it has been taking care of do you know anything about setting up map config file for no quater also how do i get signature with punkbustaer bans like you

i changed server to no quater can i still stream or am i still streaming server ip 72.5.249.25

got it up and running had a few problems when you update you have to change they shrubbot.cfg into level.db for admin levels and you also gotta list maps in the server.cfg well copy the srv_maps.cfg into the server.cfg u also gotta change a lot of config files in jaymod.cfg for user specific stuff but i thin its still streaming after update i didnt check that yet was playing couple maps....

thanks

sorry acout caps i couldnt find any documentation for jaymod 2.1 i downloaded linux files and unzipped there was no pdf file anyware i was wondering if i just had to upload one file and restart the server or not i was just tring to get help with this

CAN SOMEONE GIVE ME STEP BY STEP INSTRUCTION TO UPDATE JAYMOD USING FTP AND RCON COMMANDS ANY HELP WOULD BE APPRECIATED ALSO I NEEDED TO KNOW WHAT TO CHANGE THE SETTINGS ON THE JAYMOD.CFG TO ALLOW ONE HIT PANZER DEATHS AS WELL AS RIFLE NADES I SET THEM TO 10000 AND WHEN PEOPLE ARE HIT WITH THEM THEY DONT DIE. THE 10000 IS FOR PANZER RIFLE NADES AND NADES CURRENTLY I HAVE JAYMOD 2.0.2 ON SERVER BUT WOULD LIKE TO HAVE NEWEST VERSION THATS BETA ON IT

BENWAY IS THE BEST MANYHANKS AGAIN ANOTHER SATISFIED SERVER

need someone to re-check

ok it shows up now

;PB UCON Settings / Lists pb_sv_usessionlimit 2 pb_sv_ucontimeout 300 pb_sv_uconempty pb_sv_uconadd 1 "63.171.64.245" "pbbans" "pbbans" pb_sv_uconignoreempty i done the steps again then went and downloaded the pbsv.cfg this was at theend of the cfg file am i missing stuff ill post the hole pbsv.cfg file ;Auto Generated by PunkBuster Server ; Some of the following settings may not apply, ; consult manuals at evenbalance.com for full documentation pb_sv_MsgPrefix "^3PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)] pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)] pb_sv_KickLen 2 //[Minutes (default=2)] pb_sv_CvarFreq 6 //[# of range checks per minute] pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither] pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists] pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)] pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 100 //[High screenshot filename serial #] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] pb_sv_AutoSsFrom 60 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss] pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)] pb_sv_ssLogging 0 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 0 //[seconds] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpKey "" //[Key] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_ScoreKick 0 //[Min score (negative)] pb_sv_ChangePeriod 999 //[seconds] pb_sv_ChangeMax 1 //[Max name changes allowed] pb_sv_DupNameGrace 0 //[seconds] pb_sv_AutoUpdBan 0 //[0=No, 1=Yes (default=0)] pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" // pb_sv_HttpColBack2 "808080" // pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)] pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_UpdateGrace 600 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 1 //[seconds to wait before No GUID kick] pb_sv_AliasFn "" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists) ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text] ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)] pb_sv_cvarempty ;PB UCON Settings / Lists pb_sv_usessionlimit 2 pb_sv_ucontimeout 300 pb_sv_uconempty pb_sv_uconadd 1 "63.171.64.245" "pbbans" "pbbans" pb_sv_uconignoreempty

ok i tried again and this time i think i got it

i logged into rconcopied and pasted everything one by one waiting 5 to 10 seconds in between each one should it start streaming by itself

i was wondering if anyone could help me make server run 2.0.3 i tried to just upload .pk3 files for jaymod 2.0.3 but didnt work i had also uploaded to are re-direct for the download but wouldnt work maybe someone could help me with it also i need help setting panzer damage for one hit kills as well as rifle nades

example: Topic Title: 72.5.249.25:27960 Rep Game: ET Clantag; [TA]