Hey everybody!
Now here´s somethin for you to chew on:
-Problem
I tried every way I know to get our bfbc2 server streaming but one (=FTP-method; eliott-ness seems not to offer that)
Anyways, what I tried is: RCON-method, JAVAtool-method and http-tool.
I do exactly the same I did when setting up servers in the past - but this bfbc2 server [...+*#&!!???!!!!!$ o.0 ^^ -.-....]
-Server Info
IP: 195.72.154.11
Port-RCON: 19671
Port: 19571
Q-Port: 19671
-Logfile by Automated Hub Setup:
[iNIT] Opening connection ...
[MSG] Connection opened
[MSG] Remote console driver does not return result. Performing blind setup.
[MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use )
[MSG] Restarting PB ( pb_sv_restart )
[MSG] Waiting 30 seconds for PB to restart
[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )
[MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub )
[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )
[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )
[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )
[MSG] No error occured during setup. Server should be ready to stream
[MSG] Closing connection ...
[MSG] Connection closed
I did the same commands & stuff like the autoHubSetup manually by RCON (used both tools: BC2CC-tool and BC2 Guardian)
NO REACTION
I set the server in The Account-Manager (2 Times one with Port 19671 and one with 19571 - RCON-Password is definately correct.
-PB-Server.cfg´s
pbsv.cfg :
;Auto Generated by PunkBuster Server
; Some of the following settings may not apply,
; consult manuals at evenbalance.com for full documentation
pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)]
pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)]
pb_sv_KickLen 2 //[Minutes (default=2)]
pb_sv_CvarFreq 6 //[# of range checks per minute]
pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)]
pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)]
pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
pb_sv_SsFloor 1 //[Low screenshot filename serial #]
pb_sv_SsCeiling 100 //[High screenshot filename serial #]
pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots]
pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots]
pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
pb_sv_SsSrate 1 //[sample Rate for remote screenshots]
pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot]
pb_sv_SsPath "" //[Path where remote screenshots are saved]
pb_sv_AutoSsFrom 60 //[Min # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss]
pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)]
pb_sv_ssLogging 0 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
pb_sv_ssTimeout 0 //[seconds]
pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
pb_sv_PowerMin 10 //[Power Points]
pb_sv_PowerDef 1 //[Power Points]
pb_sv_PowerKickLen 5 //[Minutes (default=5)]
pb_sv_HttpPort 0 //[Port #]
pb_sv_HttpAddr "" //[External IP Address]
pb_sv_HttpRefresh 30 //[seconds]
pb_sv_HttpKey "" //[Key]
pb_sv_HttpMaps "" //[Map list (separate by spaces)]
pb_sv_ScoreKick 0 //[Min score (negative)]
pb_sv_ChangePeriod 999 //[seconds]
pb_sv_ChangeMax 1 //[Max name changes allowed]
pb_sv_DupNameGrace 0 //[seconds]
pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]
pb_sv_ExtChar 1 //[0=No, 1=Yes (default=0)]
pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColBack1 "000000" //
pb_sv_HttpColBack2 "808080" //
pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)]
pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)]
pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogFloor 1 //[Low log filename serial #]
pb_sv_MinName 0 //[Min Characters in Player name (default=0)]
pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]
pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)]
pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
pb_sv_UpdateGrace 600 //[seconds to wait before Update Failure kick]
pb_sv_NoGuidGrace 1 //[seconds to wait before No GUID kick]
pb_sv_AliasFn "" //[Filename (default="pbalias.dat")]
pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID]
pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]
pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists)
;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]
;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)]
pb_sv_cvarempty
;PB UCON Settings / Lists
pb_sv_usessionlimit 3
pb_sv_ucontimeout 300
pb_sv_uconmaxsendrate 16
pb_sv_uconempty
pb_sv_uconadd 1 "64.27.21.46" "pbbhub1" "pbbanshub"
pb_sv_uconignoreempty
pbucon.use:
;Auto Generated by PunkBuster Server
; Some of the following settings may not apply,
; consult manuals at evenbalance.com for full documentation
pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)]
pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)]
pb_sv_KickLen 2 //[Minutes (default=2)]
pb_sv_CvarFreq 6 //[# of range checks per minute]
pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)]
pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)]
pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
pb_sv_SsFloor 1 //[Low screenshot filename serial #]
pb_sv_SsCeiling 100 //[High screenshot filename serial #]
pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots]
pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots]
pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
pb_sv_SsSrate 1 //[sample Rate for remote screenshots]
pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot]
pb_sv_SsPath "" //[Path where remote screenshots are saved]
pb_sv_AutoSsFrom 60 //[Min # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss]
pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)]
pb_sv_ssLogging 0 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
pb_sv_ssTimeout 0 //[seconds]
pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
pb_sv_PowerMin 10 //[Power Points]
pb_sv_PowerDef 1 //[Power Points]
pb_sv_PowerKickLen 5 //[Minutes (default=5)]
pb_sv_HttpPort 0 //[Port #]
pb_sv_HttpAddr "" //[External IP Address]
pb_sv_HttpRefresh 30 //[seconds]
pb_sv_HttpKey "" //[Key]
pb_sv_HttpMaps "" //[Map list (separate by spaces)]
pb_sv_ScoreKick 0 //[Min score (negative)]
pb_sv_ChangePeriod 999 //[seconds]
pb_sv_ChangeMax 1 //[Max name changes allowed]
pb_sv_DupNameGrace 0 //[seconds]
pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]
pb_sv_ExtChar 1 //[0=No, 1=Yes (default=0)]
pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColBack1 "000000" //
pb_sv_HttpColBack2 "808080" //
pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)]
pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)]
pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogFloor 1 //[Low log filename serial #]
pb_sv_MinName 0 //[Min Characters in Player name (default=0)]
pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]
pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)]
pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
pb_sv_UpdateGrace 600 //[seconds to wait before Update Failure kick]
pb_sv_NoGuidGrace 1 //[seconds to wait before No GUID kick]
pb_sv_AliasFn "" //[Filename (default="pbalias.dat")]
pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID]
pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]
;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]
;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)]
pb_sv_cvarempty
;PB UCON Settings / Lists
pb_sv_usessionlimit 8
pb_sv_ucontimeout 300
pb_sv_uconmaxsendrate 16
pb_sv_uconempty
pb_sv_uconadd 1 "64.27.21.46" "pbbhub1" "pbbanshub"
pb_sv_uconignoreempty
Is it correct that the IP´s in line *pb_sv_uconadd* are different? I guessed not so I changed it to 64.27.21.46 in both - No Result
Is one of the IP´s "old"? like the autohubsetup uses 64.27.21.46 but in the RCONguide
written on hp its 208.122.49.138
ALSO get a message in the pb-console:
19:23:12 -> PunkBuster Server: End of Player List (32 Players)
19:23:22 -> PunkBuster Server: PB UCON Packet ignored "pbbhub1"@208.122.49.138:45035 []
Does anyone spot the error?
Thanks for your Help or suggestions!
Greetz!
-> Bavarian + English = bad idea -> hope it´s readable
