Possible lag issues in pbsv.cfg

[Earzz]

Well i just want to ask that you guys still see some options in my pbsv.cfg that can cause lag, because there is lag :huh:

These settings are located in my pbsvuser.cfg:

 

pb_sv_CvarFreq 1 //[# of range checks per minute]

pb_sv_CvarLogging 2 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]

pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists]

pb_sv_CvarUserPulse 80 //[Frequency to auto-send CvarUser (minutes)]

pb_sv_CvarChangedPulse 80 //[Frequency to auto-send CvarChanged (minutes)]

pb_sv_md5toolfreq 180

 

I almost know for sure some settings can be removed or be lowered in the pbsv.cfg, i would appreciate it that you could take a look at it.

 

Thank You,

 

Earzz.

pbsv.cfg

[RoadWarrior]

You don't have autoss turned on, and if anything will cause lag, it's that setting that would. Usually related more to Windows-based servers. Your MD5 checks are 180 seconds or 3 minutes apart, so those shouldn't cause to much of an issue. You could back them off to 300 seconds or 5 minutes as a test. Can't see anything there that would give you lag, though.

[Earzz]

Thanks for the fast response, yeah i already tweaked the config a lot but still there are some lag issues.

I can try to set the md5 checks @ 5 minutes for a try and i still can go towards 90 with the pulse settings without disabling them.

If that doesnt work ill have to look for the problem somewhere else :wacko:

 

Thank You,

 

Earzz.