Jump to content

Server is configured but not streaming


Recommended Posts

Hello PBBans,


Recently I have used the default configuration to setup streaming. My application was accepted as well but under server management the server doesn't ever report in.


When using the pv_sv_uconlist command is does show the hubs.

i3D.net Original - South Africa: [slot] [Type] [Mask] [Name]
i3D.net Original - South Africa: 1 1 pbbhub3-1
i3D.net Original - South Africa: 2 1 pbbhub3-2
i3D.net Original - South Africa: 3 1 pbbhub3-3
i3D.net Original - South Africa: End of PB UCON Profile List (3 Entries



Every other command is the configuration has been confirmed to work, it is correctly creating screenshots etc.

I tried pinging the hubs but they do not respond so either they have ICMP disabled or they are down.


Any ideas on what the problem is? From my perspective it simply looks like these servers do not work.

Link to comment
Share on other sites

there is no server on your account ATM. the hub probably removed it after it never streamed



---------- Account Information ----------
Team: Mac ([i3D])
Website: http://www.i3d.net
Account ID: 16553
Streaming Status: Not Streaming (0 / 0)

---------- Server List ----------

---------- User List ----------
mac_i3D (236031)

---------- Helpful Links ----------
Account Management
CVAR / MD5 Scans (Setup and Use)
PBBans Hub Flags
Master Player Index
Automated Streaming Setup
Not Streaming Fix



the hub is working fine. if you properly cfg server it will stream


running auto-setup and adding the proper IP:port to the hub is the best way.



Using Automated Streaming Setup Tool

The PBBans Automated Streaming Setup tool is the easiest method to get your server streaming. It's for users that have limited access to the PB folder or those who are unsure how edit PB configurations on the server.

This java based application is client side only and no data is stored on or sent to the PBBans website
For more information on applet security please visit Sun Java

  1. Visit our Automated Streaming Setup page. You will need Java installed.
  2. Enter your server IP, Port and RCON password in the correct boxes. 1
  3. Press Perform Setup and wait for it to complete. It will say [MSG] No error occurred during setup. Server should be ready to stream if completed correctly
  4. Add your server to your account located here 1
Link to comment
Share on other sites

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.