Damien Posted May 14, 2008 Share Posted May 14, 2008 (edited) HI not sure what i did wrong but i had to update pb config file in our server for cal league and lost the stream and cant seem to get it back. I ran thru all the commands to reset stuff but doesnt seem to take. Any ideas?? Besides the obvious that i dont know what I`m doing :( Thx Edited May 14, 2008 by Damien Quote Link to comment Share on other sites More sharing options...
fozzer Posted May 14, 2008 Share Posted May 14, 2008 Is it just the one server we are talking about here Bro ? and are you using pbsv 2.1b supplied by CAL ? *************************************************************** Team: The Forsakin Ones ([TFO]) Account ID: 3460 Streaming Status: Streaming (1 / 2) *************************************************************** --------------------------------------------------------------- Server List --------------------------------------------------------------- COD4 - 216.246.49.116:28960 COD4 - 216.246.49.204:28960 (Streaming) --------------------------------------------------------------- Quote Link to comment Share on other sites More sharing options...
Damien Posted May 14, 2008 Author Share Posted May 14, 2008 (edited) Yes 1 server and it is the 2.1b by cal Edited May 14, 2008 by Damien Quote Link to comment Share on other sites More sharing options...
fozzer Posted May 14, 2008 Share Posted May 14, 2008 Yes 1 server and it is the 2.1b by cal Yea, they have PsB as their mandatory streaming partner but use PBBans cvar / MD5 scans :P tells us something eh. from what I can gather your streaming commands were saved in the pbsv.cfg which has now been overwritten by the CAL pbsv. I am assuming that you already have a pbsvuser.cfg Just add these command lines to it; pb_sv_task 50 3600 pb_sv_ver pb_sv_usessionlimit 8 pb_sv_uconadd 1 64.27.21.46 pbbanshub pbbanshub Make sure you have a blank file pbucon.use in your PB directory and execute a pb restart via rcon (pb_sv_restart) That should sort your steaming to PBBans out. A point to note, if you could pass this on to CAL admins, since the issue of their pbsv 2.1b there have been 3 updates to the PBBans cvar / MD5 scans so what they are using is outdated. Quote Link to comment Share on other sites More sharing options...
MaydaX Posted May 14, 2008 Share Posted May 14, 2008 Would be nice if the universal config had a ucon profile for us: pb_sv_USessionLimit 8pb_sv_uconadd 0 64.27.21.46 pbbanshub pbbanshub pb_sv_task 0 7200 pb_sv_ver pb_sv_task 0 86400 pb_sv_update And of course the pbucon.use file. The above would be a streaming only setup so that all a server admin has to do is add the ip to their account here and it's ready to go. Quote Link to comment Share on other sites More sharing options...
Damien Posted May 14, 2008 Author Share Posted May 14, 2008 (edited) //******************** CAL/CEVO/TWL PunkBuster Config***********************// //**************************************************************************// //****************************Call of Duty 4********************************// //*****************************Version: 2.1b*********************************// //*************************Date Created: 4/18/2008**************************// //**************************************************************************// //*************** REQUIRED GAMEPLAY SETTINGS ******************************// // The following CVARs are required for use in CAL, CEVO, TGL, and TWL CoD4 gameplay. // Altering of these settings and checks is prohibited, and may result in // your teams suspension. DO NOT EDIT. //******************************************// // Required settings! put this at the beginning of everything since we're changing timer frequency //******************************************// PB_SV_Sleep 100 //[Force PB to sleep() longer, therefor reducing bandwidth requirements and client overhead] //*******************************************// //******Auto Screenshot Setup****************// //*******************************************// pb_sv_AutoSs 1 //[0=3DNo, 1=3DYes (default=3D0)] pb_sv_AutoSsFrom 200 //[Minimum # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 420 //[Maximum # of seconds to wait before requesting next ss] pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 40000 //[High screenshot filename serial #] NOTE: Set high to avoid overwriting files pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsDelay 3 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] //*******************************************// //********Cvar Scan Settings*****************// //*******************************************// pb_sv_CvarFreq 2 //[# of range checks per minute] pb_sv_CvarLogging 0 //[1=3DReg. Log, 2=3DVar Log, 3=3DBoth, 0=3DNeither] pb_sv_CvarWalk 1 //[0=3Ddisabled, 1-4=3DWalk through obtained Cvar lists] pb_sv_CvarUserPulse 99 //[How often (in min.) to auto-send CvarUsercommand] pb_sv_CvarChangedPulse 99 //[How often (in min.) to auto-send CvarChanged command] pb_sv_CQC 1 //[0=3DNo, 1=3DYes (default=3D1)] //*******************************************// //****Log File & Ban File Settings***********// //*******************************************// pb_sv_BanEmpty pb_sv_LogSync 0 //[0=3DNo, 1=3DYes (default=3D0)] pb_sv_LogCeiling 1000 //[High log filename serial #] pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists) pb_sv_banload pb/pbbans.dat //PB Ban list Update pb_sv_autoUpdBan 1 //[0=3DNo, 1=3DYes (default=3D0)] //*******************************************// //************Kick Controls******************// //*******************************************// pb_sv_KickLen 0 //[minutes (default=3D2)] pb_sv_scoreKick 0 //[minimum score (negative)] PB_SV_Restrictions 1 //*******************************************// //***PunkBuster Power Points Settings********// //*******************************************// pb_sv_PowerMin 10 //[power points] pb_sv_PowerDef 1 //[power points] pb_sv_PowerKickLen 0 //[minutes (default=3D5)] //*******************************************// //*********Miscellaneous Settings************// //*******************************************// pb_sv_changePeriod 10 //[seconds] pb_sv_changeMax 50 //[max name changes allowed] pb_sv_dupNameGrace 500 //[seconds] pb_sv_extChar 0 //[0=3DNo, 1=3DYes (default=3D0)] pb_sv_MaxConDls 3 //[Maximum number on concurent PB downloads] pb_sv_MaxConUpdates 12 //[Maximum number on concurent PB updates] pb_sv_MaxDlRate 5 //[Max PB download rate] pb_sv_badnameempty //[Empty the bad name list] pb_sv_minName 2 //[Minimum number of characters for a player name] PB_SV_UpdateGrace 300 //[Give users 5 minutes to fix their PB] //*******************************************// //**************Task Settings****************// //*******************************************// pb_sv_taskempty pb_sv_MsgPrefix "^7[^1CAL/CEVO/TGL/TWL PB^7]" //[PB Message Prefix (default=3D^3PunkBuster Client)] pb_sv_task 10 481 "say ^2CAL/CEVO/TGL/TWL ^4Competition PunkBuster Config^7|| ^1Version 2.1b ^2 Final|| 4/15/08" pb_sv_task 1 60 "pb_sv_guidrelax 1" pb_sv_task 1 20 "pb_sv_bindsrch "+attack"" pb_sv_task 1 25 "pb_sv_bindsrch "r_lodscalerigid"" pb_sv_task 1 15 "pb_sv_bindsrch "com_maxfps" pb_sv_task 1 15 "pb_sv_bindsrch "footsteps" pb_sv_task 1 30 "pb_sv_bindsrch "snd_restart"" pb_sv_task 1 15 "pb_sv_bindsrch "+holdbreath"" pb_sv_task 1 10 "pb_sv_bindsrch "sv_ClientSideBullets" This how and how my pbsv cfg is currently written. Minus the list of hacks and cvars and protected tags didnt know if I should post that stuff or not I have enter both of the above commands thru rcon console but niether worked. when I enter the pb_sv_uconadd 0 64.27.21.46 pbbanshub pbbanshub command it tells me this file already excists and cannot be writtin ??? But I cant find that file nowhere? Edited May 14, 2008 by Damien Quote Link to comment Share on other sites More sharing options...
fozzer Posted May 14, 2008 Share Posted May 14, 2008 dont get mixed up Bro. We are talking about 2 seperate files in your pb directory. pbsv.cfg & pbsvuser.cfg The streaming commands must be present in one of those cfg's for streaming to work, and a blank file should also be present in the PB directory(pbucon.use) The config I downloaded off the CAL site was a pbsv.cfg (pbsv 2.1b) Quote Link to comment Share on other sites More sharing options...
Damien Posted May 14, 2008 Author Share Posted May 14, 2008 Well I put the old cfg back in and its streaming agian . They (CAL) sure make it a pain in the butt I`ll say that !! Not sure what to try next to get it to work for the match . Quote Link to comment Share on other sites More sharing options...
Damien Posted May 14, 2008 Author Share Posted May 14, 2008 (edited) OK i added the 2.1b back into the pbsv.cfg file agian. I do have a empty pbucon.use file in there. But my pbsvuser.cfg is also empty. I entered the commands thru console with the same results with the same message pb_sv_uconadd 0 64.27.21.46 pbbanshub pbbanshub command it tells me this file already excists and cannot be rewritten ??? But cant find that anywhere ,I dont understand why it tells me that. I cant seem to find it in the pb folder at all. Edited May 14, 2008 by Damien Quote Link to comment Share on other sites More sharing options...
fozzer Posted May 14, 2008 Share Posted May 14, 2008 . I do have a empty pbucon.use file in there. But my pbsvuser.cfg is also empty. Like I said earlier m8. Manually add these command lines into your pbsvuser.cfg for streaming only; pb_sv_USessionLimit 8 pb_sv_uconadd 0 64.27.21.46 pbbanshub pbbanshub pb_sv_task 0 7200 pb_sv_ver pb_sv_task 0 86400 pb_sv_update if you want to take advantage of all the PBBans Hub features the lines to add are; pb_sv_USessionLimit 8 pb_sv_uconadd 1 64.27.21.46 pbbanshub pbbanshub pb_sv_task 0 7200 pb_sv_ver pb_sv_task 0 86400 pb_sv_update execute a PB restart via rcon and thats it. Quote Link to comment Share on other sites More sharing options...
Damien Posted May 14, 2008 Author Share Posted May 14, 2008 Thx alot guys for your help,,,,,, up and going!!!! :) Told you I was a idiot I had my pbsvuser.cfg file misnamed I had it pbsuser.cfg geez....... Sorry for all the fuss!!! Thx agian!!! Damien Out!! Quote Link to comment Share on other sites More sharing options...
fozzer Posted May 15, 2008 Share Posted May 15, 2008 Thx alot guys for your help,,,,,, up and going!!!! :)Told you I was a idiot I had my pbsvuser.cfg file misnamed I had it pbsuser.cfg geez....... Sorry for all the fuss!!! Thx agian!!! Damien Out!! Alls well that ends well Bro :) Glad your issue was resolved. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.