Jump to content

streaming problem


thunderje

Recommended Posts

hi guys

i ran the auto hub setup here for streaming and it was successfull,i added the server, the ip is: 208.167.242.92:16567 i added it thru my panel here,but it is not showing it as streaming,but all went well in the auto hub setup,could someone look at this for me, thanx guys

Link to comment
Share on other sites

this is a copy of the config if it might help

 

; ------------------------------

; Notes

; ------------------------------

; Revision 1.1

; PBBans.com Universal pbsv.cfg

; Can be used for all PB enabled servers

 

; ------------------------------

; General Settings

; ------------------------------

pb_sv_MsgPrefix "^5PunkBuster Server"

pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]

pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)]

pb_sv_MaxSendRate 8 // [speed at which PB Server sends pbcl and pbag updates in KBps (default=8)]

pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]

pb_sv_Sleep 60 //[# of Milliseconds (default=60)]

pb_sv_PowerMin 10 //[Power Points]

pb_sv_PowerDef 1 //[Power Points]

pb_sv_PowerKickLen 5 //[Minutes (default=5)]

pb_sv_DupNameGrace 0 //[seconds]

pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)]

pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]

pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]

pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]

pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)]

 

 

; ------------------------------

; Other Settings

; ------------------------------

pb_sv_Restrictions 1 //[Kick for Restrictions 0=No, 1=Yes (default=1)]

pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]

pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]

pb_sv_LogFloor 1 //[Low log filename serial #]

pb_sv_MinName 0 //[Min Characters in Player name (default=0)]

pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]

pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)]

pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]

pb_sv_ChangePeriod 300 // For pb_sv_ChangeMax

pb_sv_ChangeMax 5 // [Max name changes allowed in pb_sv_ChangePeriod] ex 5 changes in 300 seconds

 

 

; ------------------------------

; Kick Settings

; ------------------------------

pb_sv_KickLen 5 //[Minutes (default=2)]

pb_sv_ScoreKick 0 //[Min score (negative) ]

pb_sv_UpdateGrace 2400 //[seconds to wait before Update Failure kick]

pb_sv_NoGuidGrace 10 //[seconds to wait before No GUID kick]

 

 

; ------------------------------

; PBSS Settings

; ------------------------------

pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)]

pb_sv_SsFloor 1 //[Low screenshot filename serial #]

pb_sv_SsCeiling 2000 //[High screenshot filename serial #]

pb_sv_AutoSsFrom 300 //[Min # of seconds to wait before requesting next ss]

pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss]

pb_sv_SsCmd "" //[Filename of system command to run after screenshots]

pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots]

pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots]

pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]

pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]

pb_sv_SsSrate 1 //[sample Rate for remote screenshots]

pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot]

pb_sv_SsPath "" //[Path where remote screenshots are saved]

pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]

pb_sv_ssTimeout 300 //[seconds]

 

 

; ------------------------------

; Web Tool Settings

; ------------------------------

pb_sv_HttpPort 0 //[Port #]

pb_sv_HttpAddr "" //[External IP Address]

pb_sv_HttpKey "" //[Password]

pb_sv_HttpRefresh 30 //[seconds]

pb_sv_HttpMaps "" //[Map list (separate by spaces)]

pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]

pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]

pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]

pb_sv_HttpColBack1 "000000" //

pb_sv_HttpColBack2 "808080" //

pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]

pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]

pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]

pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)]

 

 

; ------------------------------

; CVAR Settings (Only for supported games)

; ------------------------------

pb_sv_CvarFreq 3 //[# of range checks per minute]

pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]

pb_sv_CvarWalk 2 //[0=disabled, 1-4=Walk through obtained Cvar lists]

pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)]

pb_sv_CvarChangedPulse 60 //[Frequency to auto-send CvarChanged (minutes)]

 

 

; ------------------------------

; Alias Settings (Only for supported games)

; ------------------------------

pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")]

pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]

pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID]

pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]

 

 

; ------------------------------

; PB Tasks (pb_sv_task [start delay (seconds)] [repeat (seconds)] [command])

; ------------------------------

pb_sv_task 0 7200 pb_sv_ver // Keep-Alive for PBBans Hub

pb_sv_task 0 86400 pb_sv_update // Check for PB updates daily

 

 

; ------------------------------

; Badname List (pb_sv_badname [grace_period_secs] [disallowed text])

; ------------------------------

pb_sv_badnameempty

;pb_sv_badname 10 server // Sample

 

 

; ------------------------------

; IP Guard

; ------------------------------

;pb_sv_ipguard 128.0.0.1 // Sample

 

 

; ------------------------------

; Cvar List

; ------------------------------

pb_sv_cvarempty

 

 

; ------------------------------

; Protected Tags

; ------------------------------

pb_sv_protecttag 1 PBSTAFF

pb_sv_protecttag 1 PBBans

 

 

; ------------------------------

; Load Ban List

; ------------------------------

pb_sv_banempty

pb_sv_banload

 

 

; ------------------------------

; Load IP Bans

; ------------------------------

;pb_sv_banmask "128.0.0.1" // Sample

 

 

; ------------------------------

; PB UCON Settings / Lists

; ------------------------------

pb_sv_uconignoreempty

pb_sv_usessionlimit 9

pb_sv_ucontimeout 90

pb_sv_uconempty

pb_sv_uconadd 1 64.27.21.46 "pbbanshub" "pbbanshub"

 

 

; ------------------------------

; Exec Configs

; ------------------------------

pb_sv_load pbsvuser.cfg

pb_sv_load pbsvlog.cfg

Link to comment
Share on other sites

It sometimes takes a bit to show as streaming.

 

How long ago did you actually stream up ?

 

Try:

 

pb_sv_update

 

Wait a minute or so

 

pb_sv_restart

 

Good choice to stream, may your catches be worth it :D

Link to comment
Share on other sites

any luck? I notice that you are still not streaming.

 

pbucon.use file is in the pb folder? PB was enabled when you tried to stream and if not , now that it has been enabled have you restarted PB?

 

Perhaps the issue is with the host and a NAT firewall? - Sorry if this has all been gone through; was not on IRC today.

 

Whatever the case, trust me - we can get it streaming B)

 

My clan had an issue when we first tried to stream here back in '06 and I cannot begin to tel you the support I had.. as it turns out it was a host problem but once we changed hosts we have never looked back :D So dont give up .. it is worth it ;)

 

@(*0*)@

Link to comment
Share on other sites

hi guys

i still cant get pb bans to stream,im running a coop aix bf2 server if that info might help,at this point should i go and reinstall server (do a full wipe)via my control panel and start fresh?with a clean install

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.