pahkiller Posted July 2, 2010 Share Posted July 2, 2010 Hi Probably nothing but I have 2 BC2 game servers running, I have an account One of my servers is down at the moment but the other is running no problems, I registered the 2 servers probably a couple of days ago but they just say Inactive the one running at the moment is 202.60.82.53 port 48889 the other which could but up anytime 202.60.82.51 port 48890 I am guessing they haven't been approved yet? i have no idea just guessing thanks Quote Link to comment Share on other sites More sharing options...
HSMagnet Posted July 2, 2010 Share Posted July 2, 2010 (edited) try running the webtool on them http://www.pbbans.com/automated-streaming-setup.html Edited July 2, 2010 by HSMagnet Quote Link to comment Share on other sites More sharing options...
pahkiller Posted July 3, 2010 Author Share Posted July 3, 2010 try running the webtool on them http://www.pbbans.com/automated-streaming-setup.html Hi Did that heres the error message [iNIT] Opening connection ... ********************************ERROR******************************** Read timed out *********************************************************************** Quote Link to comment Share on other sites More sharing options...
HSMagnet Posted July 3, 2010 Share Posted July 3, 2010 then IP:PORT could be entered incorrectly or something , PW ? Quote Link to comment Share on other sites More sharing options...
pahkiller Posted July 3, 2010 Author Share Posted July 3, 2010 (edited) then IP:PORT could be entered incorrectly or something , PW ? Yep all done I forgot to select the correct game how dumb of me both servers are up now anyway still says Inactive but heres what the reply was [iNIT] Opening connection ... [MSG] Connection opened [MSG] Remote console driver does not return result. Performing blind setup. [MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use ) [MSG] Restarting PB ( pb_sv_restart ) [MSG] Waiting 30 seconds for PB to restart [MSG] Setting sessions limit ( pb_sv_usessionlimit 8 ) [MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub ) [MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 ) [MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver ) [MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg ) [MSG] No error occured during setup. Server should be ready to stream [MSG] Closing connection ... [MSG] Connection closed Edited July 3, 2010 by pahkiller Quote Link to comment Share on other sites More sharing options...
pahkiller Posted July 3, 2010 Author Share Posted July 3, 2010 Yep all done I forgot to select the correct game how dumb of me both servers are up now anyway still says Inactive but heres what the reply was [iNIT] Opening connection ... [MSG] Connection opened [MSG] Remote console driver does not return result. Performing blind setup. [MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use ) [MSG] Restarting PB ( pb_sv_restart ) [MSG] Waiting 30 seconds for PB to restart [MSG] Setting sessions limit ( pb_sv_usessionlimit 8 ) [MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub ) [MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 ) [MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver ) [MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg ) [MSG] No error occured during setup. Server should be ready to stream [MSG] Closing connection ... [MSG] Connection closed So what Can I do now to get the servers streaming ? Thanks Quote Link to comment Share on other sites More sharing options...
fozzer Posted July 3, 2010 Share Posted July 3, 2010 So what Can I do now to get the servers streaming ? Thanks You use the query port to initiate streaming. You add the servers to your team account using the correct game port. The 2 servers added by you to your team account still contain the query port: 202.60.82.51:48890 202.60.82.53:48889 The proper server address of both servers; 202.60.82.51:19569 202.60.82.53:19568 Solution: Completely delete the 2 servers you have added to your team account, via account manager. Then add the 2 servers, using the correct server address, to your team account, again, via account manager. It should be noted that the servers, once added, will have to be ok'd by a staff member before they will show as streaming. Current average wait time is 2 - 20 minutes :) Quote Link to comment Share on other sites More sharing options...
pahkiller Posted July 3, 2010 Author Share Posted July 3, 2010 You use the query port to initiate streaming. You add the servers to your team account using the correct game port. The 2 servers added by you to your team account still contain the query port: 202.60.82.51:48890 202.60.82.53:48889 The proper server address of both servers; 202.60.82.51:19569 202.60.82.53:19568 Solution: Completely delete the 2 servers you have added to your team account, via account manager. Then add the 2 servers, using the correct server address, to your team account, again, via account manager. It should be noted that the servers, once added, will have to be ok'd by a staff member before they will show as streaming. Current average wait time is 2 - 20 minutes :) Ok I redid the server setup and used the ports you suggested 202.60.82.51:19569 202.60.82.53:19568 and get this error message when I run "Automated Streaming Setup" [iNIT] Opening connection ... ********************************ERROR******************************** Connection refused: connect *********************************************************************** But if I use these settings 202.60.82.51:48890 202.60.82.53:48889 I get this message [iNIT] Opening connection ... [MSG] Connection opened [MSG] Remote console driver does not return result. Performing blind setup. [MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use ) [MSG] Restarting PB ( pb_sv_restart ) [MSG] Waiting 30 seconds for PB to restart [MSG] Setting sessions limit ( pb_sv_usessionlimit 8 ) [MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub ) [MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 ) [MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver ) [MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg ) [MSG] No error occured during setup. Server should be ready to stream [MSG] Closing connection ... [MSG] Connection closed Quote Link to comment Share on other sites More sharing options...
fozzer Posted July 3, 2010 Share Posted July 3, 2010 Ok I redid the server setup and used the ports you suggested 202.60.82.51:19569 202.60.82.53:19568 and get this error message when I run "Automated Streaming Setup" [iNIT] Opening connection ... ********************************ERROR******************************** Connection refused: connect *********************************************************************** But if I use these settings 202.60.82.51:48890 202.60.82.53:48889 I get this message [iNIT] Opening connection ... [MSG] Connection opened [MSG] Remote console driver does not return result. Performing blind setup. [MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use ) [MSG] Restarting PB ( pb_sv_restart ) [MSG] Waiting 30 seconds for PB to restart [MSG] Setting sessions limit ( pb_sv_usessionlimit 8 ) [MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub ) [MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 ) [MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver ) [MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg ) [MSG] No error occured during setup. Server should be ready to stream [MSG] Closing connection ... [MSG] Connection closed Please read my post again Bro. You use the query port to initiate streaming via the automated setup, in your case it is; 202.60.82.51:48890 202.60.82.53:48889 Then you add the servers to your team account using the proper game port in your case it is; 202.60.82.51:19569 202.60.82.53:19568 Anyways, because you had already run the streaming initiation commands via the automated setup, your 2 servers are now streaming; *************************************************************** Team: Aussie Assassins Unit (=AAU=) Account ID: 6605 Streaming Status: Streaming (2 / 2) *************************************************************** --------------------------------------------------------------- Server List --------------------------------------------------------------- BFBC2 - 202.60.82.51:19569 (Streaming) BFBC2 - 202.60.82.53:19568 (Streaming) --------------------------------------------------------------- User List --------------------------------------------------------------- pahkiller (128628) Quote Link to comment Share on other sites More sharing options...
pahkiller Posted July 3, 2010 Author Share Posted July 3, 2010 Please read my post again Bro. You use the query port to initiate streaming via the automated setup, in your case it is; 202.60.82.51:48890 202.60.82.53:48889 Then you add the servers to your team account using the proper game port in your case it is; 202.60.82.51:19569 202.60.82.53:19568 Anyways, because you had already run the streaming initiation commands via the automated setup, your 2 servers are now streaming; *************************************************************** Team: Aussie Assassins Unit (=AAU=) Account ID: 6605 Streaming Status: Streaming (2 / 2) *************************************************************** --------------------------------------------------------------- Server List --------------------------------------------------------------- BFBC2 - 202.60.82.51:19569 (Streaming) BFBC2 - 202.60.82.53:19568 (Streaming) --------------------------------------------------------------- User List --------------------------------------------------------------- pahkiller (128628) Ok get it now thank you very much will save this page Quote Link to comment Share on other sites More sharing options...
fozzer Posted July 3, 2010 Share Posted July 3, 2010 Ok get it now thank you very much will save this page Alls well that ends well :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.