Inactive 202.60.82.53

[pahkiller]

Hi

Probably nothing but I have 2 BC2 game servers running, I have an account

One of my servers is down at the moment but the other is running no problems, I registered the 2 servers

probably a couple of days ago but they just say Inactive the one running at the moment is 202.60.82.53 port 48889

the other which could but up anytime 202.60.82.51 port 48890

I am guessing they haven't been approved yet? i have no idea just guessing

thanks

[HSMagnet]

try running the webtool on them

 

http://www.pbbans.com/automated-streaming-setup.html

Edited July 2, 2010 by HSMagnet

[pahkiller]

  On 7/2/2010 at 11:27 PM, HSMagnet said:

try running the webtool on them

 

http://www.pbbans.com/automated-streaming-setup.html

 

Hi

Did that heres the error message

[iNIT] Opening connection ...

 

********************************ERROR********************************

Read timed out

***********************************************************************

[HSMagnet]

then IP:PORT could be entered incorrectly or something , PW ?

[pahkiller]

  On 7/3/2010 at 12:39 AM, HSMagnet said:

then IP:PORT could be entered incorrectly or something , PW ?

 

Yep all done I forgot to select the correct game how dumb of me

both servers are up now

anyway still says Inactive

but heres what the reply was

 

[iNIT] Opening connection ...

[MSG] Connection opened

[MSG] Remote console driver does not return result. Performing blind setup.

[MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use )

[MSG] Restarting PB ( pb_sv_restart )

[MSG] Waiting 30 seconds for PB to restart

[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )

[MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub )

[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )

[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )

[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )

[MSG] No error occured during setup. Server should be ready to stream

[MSG] Closing connection ...

[MSG] Connection closed

Edited July 3, 2010 by pahkiller

[pahkiller]

  On 7/3/2010 at 12:47 AM, pahkiller said:

Yep all done I forgot to select the correct game how dumb of me

both servers are up now

anyway still says Inactive

but heres what the reply was

 

[iNIT] Opening connection ...

[MSG] Connection opened

[MSG] Remote console driver does not return result. Performing blind setup.

[MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use )

[MSG] Restarting PB ( pb_sv_restart )

[MSG] Waiting 30 seconds for PB to restart

[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )

[MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub )

[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )

[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )

[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )

[MSG] No error occured during setup. Server should be ready to stream

[MSG] Closing connection ...

[MSG] Connection closed

 

So what Can I do now to get the servers streaming ?

Thanks

[fozzer]

  On 7/3/2010 at 3:07 AM, pahkiller said:

So what Can I do now to get the servers streaming ?

Thanks

 

You use the query port to initiate streaming.

You add the servers to your team account using the correct game port.

 

The 2 servers added by you to your team account still contain the query port:

202.60.82.51:48890

202.60.82.53:48889

 

The proper server address of both servers;

202.60.82.51:19569

202.60.82.53:19568

 

Solution:

Completely delete the 2 servers you have added to your team account, via account manager.

Then add the 2 servers, using the correct server address, to your team account, again, via account manager.

 

It should be noted that the servers, once added, will have to be ok'd by a staff member before they will show as streaming.

Current average wait time is 2 - 20 minutes :)

[pahkiller]

  On 7/3/2010 at 7:04 AM, fozzer said:

You use the query port to initiate streaming.

You add the servers to your team account using the correct game port.

 

The 2 servers added by you to your team account still contain the query port:

202.60.82.51:48890

202.60.82.53:48889

 

The proper server address of both servers;

202.60.82.51:19569

202.60.82.53:19568

 

Solution:

Completely delete the 2 servers you have added to your team account, via account manager.

Then add the 2 servers, using the correct server address, to your team account, again, via account manager.

 

It should be noted that the servers, once added, will have to be ok'd by a staff member before they will show as streaming.

Current average wait time is 2 - 20 minutes :)

 

 

 

Ok I redid the server setup and used the ports you suggested

202.60.82.51:19569

202.60.82.53:19568

and get this error message when I run "Automated Streaming Setup"

 

[iNIT] Opening connection ...

 

********************************ERROR********************************

Connection refused: connect

***********************************************************************

 

But if I use these settings

202.60.82.51:48890

202.60.82.53:48889

I get this message

 

[iNIT] Opening connection ...

[MSG] Connection opened

[MSG] Remote console driver does not return result. Performing blind setup.

[MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use )

[MSG] Restarting PB ( pb_sv_restart )

[MSG] Waiting 30 seconds for PB to restart

[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )

[MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub )

[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )

[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )

[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )

[MSG] No error occured during setup. Server should be ready to stream

[MSG] Closing connection ...

[MSG] Connection closed

[fozzer]

  On 7/3/2010 at 8:05 AM, pahkiller said:

Ok I redid the server setup and used the ports you suggested

202.60.82.51:19569

202.60.82.53:19568

and get this error message when I run "Automated Streaming Setup"

 

[iNIT] Opening connection ...

 

********************************ERROR********************************

Connection refused: connect

***********************************************************************

 

But if I use these settings

202.60.82.51:48890

202.60.82.53:48889

I get this message

 

[iNIT] Opening connection ...

[MSG] Connection opened

[MSG] Remote console driver does not return result. Performing blind setup.

[MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use )

[MSG] Restarting PB ( pb_sv_restart )

[MSG] Waiting 30 seconds for PB to restart

[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )

[MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub )

[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )

[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )

[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )

[MSG] No error occured during setup. Server should be ready to stream

[MSG] Closing connection ...

[MSG] Connection closed

Please read my post again Bro.

You use the query port to initiate streaming via the automated setup, in your case it is;

202.60.82.51:48890

202.60.82.53:48889

Then you add the servers to your team account using the proper game port in your case it is;

202.60.82.51:19569

202.60.82.53:19568

 

Anyways, because you had already run the streaming initiation commands via the automated setup, your 2 servers are now streaming;

 

***************************************************************
Team: Aussie Assassins Unit (=AAU=)
Account ID: 6605
Streaming Status: Streaming (2 / 2)
***************************************************************

---------------------------------------------------------------
Server List
---------------------------------------------------------------
BFBC2 - 202.60.82.51:19569 (Streaming)
BFBC2 - 202.60.82.53:19568 (Streaming)

---------------------------------------------------------------
User List
---------------------------------------------------------------
pahkiller (128628)

[pahkiller]

  On 7/3/2010 at 9:34 AM, fozzer said:

Please read my post again Bro.

You use the query port to initiate streaming via the automated setup, in your case it is;

202.60.82.51:48890

202.60.82.53:48889

Then you add the servers to your team account using the proper game port in your case it is;

202.60.82.51:19569

202.60.82.53:19568

 

Anyways, because you had already run the streaming initiation commands via the automated setup, your 2 servers are now streaming;

 

***************************************************************
Team: Aussie Assassins Unit (=AAU=)
Account ID: 6605
Streaming Status: Streaming (2 / 2)
***************************************************************

---------------------------------------------------------------
Server List
---------------------------------------------------------------
BFBC2 - 202.60.82.51:19569 (Streaming)
BFBC2 - 202.60.82.53:19568 (Streaming)

---------------------------------------------------------------
User List
---------------------------------------------------------------
pahkiller (128628)

 

Ok get it now thank you very much will save this page

[fozzer]

  On 7/3/2010 at 10:50 AM, pahkiller said:

Ok get it now thank you very much will save this page

Alls well that ends well :)