KinJO187 Posted October 24, 2011 Share Posted October 24, 2011 Hi wondering if you could help me, i have my server approved for bf3 and im trying with the hub and all seems to go ok , but when i go back into manager servers it still says inactive, i have restarted the server and tried this several time without prevail. Anyone else having this issue? Quote Link to comment Share on other sites More sharing options...
HSMagnet Posted October 24, 2011 Share Posted October 24, 2011 (edited) 2) Non streaming issues. Please make sure your server is listed in battlelog if it won't stream. If the server is not connected to the backend UCON will not work. http://www.pbbans.com/forums/bf3-issues-t147847.html Edited October 25, 2011 by HSMagnet fixed link Quote Link to comment Share on other sites More sharing options...
KinJO187 Posted October 24, 2011 Author Share Posted October 24, 2011 http://www.pbbans.com/forums/bf3-issues-t147847.html/page__pid__383085?do=findComment&comment=383085 link is dead Quote Link to comment Share on other sites More sharing options...
TimSad Posted October 25, 2011 Share Posted October 25, 2011 I'm getting the same problem as the OP. Quote Link to comment Share on other sites More sharing options...
HSMagnet Posted October 25, 2011 Share Posted October 25, 2011 fixed the link http://www.pbbans.com/forums/bf3-issues-t147847.html do your servers appear in battlelog? Quote Link to comment Share on other sites More sharing options...
KinJO187 Posted October 25, 2011 Author Share Posted October 25, 2011 yeah it is not working, and then they dont even give me correct link... same old same old... lol i checked my pb cfg and it has written correctly just not working on here? Quote Link to comment Share on other sites More sharing options...
HSMagnet Posted October 25, 2011 Share Posted October 25, 2011 yeah it is not working, and then they dont even give me correct link... same old same old... lol i checked my pb cfg and it has written correctly just not working on here? what? servers can't stream if they do not appear on battlelog because that means they are not connected to the backend do your servers show on battlelog? Quote Link to comment Share on other sites More sharing options...
TimSad Posted October 25, 2011 Share Posted October 25, 2011 (edited) fixed the link it is a sticky in this section of the forums do your servers appear in battlelog? Link still seems dead? My server appears just fine in battlelog. I'm pretty sure that if my server shows as Inactive, that an admin has already approved it? Here is what I currently have in my pbsv.cfg... ; ******************************************* ; PBBans.com PBSV Config ; Battlefield 3 ; Last Updated Oct 7th 2011 ; ******************************************* ; ------------------------------ ; General Settings ; ------------------------------ pb_sv_MsgPrefix "PunkBuster Server" pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)] pb_sv_MaxSendRate 8 // [speed at which PB Server sends pbcl and pbag updates in KBps (default=8)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_DupNameGrace 0 //[seconds] pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)] ; ------------------------------ ; Other Settings ; ------------------------------ pb_sv_Restrictions 1 //[Kick for Restrictions 0=No, 1=Yes (default=1) 2=key macro Restrictions] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_ChangePeriod 600 // For pb_sv_ChangeMax pb_sv_ChangeMax 5 // [Max name changes allowed in pb_sv_ChangePeriod] ex 5 changes in 600 seconds ; ------------------------------ ; Kick Settings ; ------------------------------ pb_sv_KickLen 5 //[Minutes (default=2)] pb_sv_ScoreKick 0 //[Min score (negative) ] pb_sv_UpdateGrace 2400 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 10 //[seconds to wait before No GUID kick] ; ------------------------------ ; PBSS Settings ; ------------------------------ pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 1000 //[High screenshot filename serial #] pb_sv_AutoSsFrom 200 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 600 //[Max # of seconds to wait before requesting next ss] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 3 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 300 //[seconds] ; ------------------------------ ; Web Tool Settings ; ------------------------------ pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpKey "" //[Password] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" //[background Color #1 in WebTool (default=000000)] pb_sv_HttpColBack2 "808080" //[background Color #2 in WebTool (default=808080)] pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)] ; ------------------------------ ; MD5 Tool Settings ; ------------------------------ pb_sv_md5toolfreq 50 // [Reducing this will increase the scan frequency that can cause lag and also increases the chances being kicked for Ignoring MD5 Tool Queries.] ; ------------------------------ ; Alias Settings (Only for supported games) ; ------------------------------ pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] ; ------------------------------ ; PB Tasks (pb_sv_task [start delay (seconds)] [repeat (seconds)] [command]) ; ------------------------------ pb_sv_task 0 7200 pb_sv_ver // Keep-Alive for PBBans Hub (Do not remove. Will cause servers to appear as inactive when empty for long periods of time) pb_sv_task 0 86400 pb_sv_update // Check for PB updates daily (More dependable than UCON system) ; ------------------------------ ; Badname List (pb_sv_badname [grace_period_secs] [disallowed text]) ; ------------------------------ pb_sv_badnameempty ;pb_sv_badname 10 server // Sample ; ------------------------------ ; IP Guard ; ------------------------------ ;pb_sv_ipguard 128.0.0.1 // Sample ; ------------------------------ ; Protected Tags ; ------------------------------ pb_sv_protecttag 1 PBSTAFF pb_sv_protecttag 1 PBBans ; ------------------------------ ; Load Ban List ; ------------------------------ pb_sv_banempty pb_sv_banload ; ------------------------------ ; Load IP Bans ; ------------------------------ ;pb_sv_banmask "128.0.0.1" // Sample ; ------------------------------ ; PB UCON Settings / Lists ; ------------------------------ pb_sv_usessionlimit 10 pb_sv_ucontimeout 300 pb_sv_uconempty pb_sv_uconadd 1 208.122.49.138 "pbbhub1" "pbbanshub" ; ------------------------------ ; PB UCON Ignore List (Prevents UCON users from sending various commands) ; ------------------------------ pb_sv_uconignoreempty pb_sv_uconignore admin.shutdown pb_sv_uconignore pb_sv_md5toolfreq pb_sv_uconignore pb_sv_guidrelax ; ------------------------------ ; Exec Configs ; ------------------------------ pb_sv_load pbsvuser.cfg pb_sv_load pbsvlog.cfg ; ------------------------------ ; Misc ; ------------------------------ pb_sv_writecfg pbucon.use // Enables UCON in case the server removes the file for any reason. pb_sv_load messages.cfg EDIT: Bah! Sorry for the long code! Is there a way to enable scroll via BBcode? Edited October 25, 2011 by TimSad Quote Link to comment Share on other sites More sharing options...
KinJO187 Posted October 25, 2011 Author Share Posted October 25, 2011 what? servers can't stream if they do not appear on battlelog because that means they are not connected to the backend do your servers show on battlelog? , i am waiting on a fix which is coming soon for the backend, np as long as thats all it is i will come back after the fix. One last thing how do i change my information on my account like tags and team name i would like it changed but am unable to do it? Thanks. Quote Link to comment Share on other sites More sharing options...
HSMagnet Posted October 25, 2011 Share Posted October 25, 2011 sorry the link is in the SGA area. the quote is still valid 2) Non streaming issues. Please make sure your server is listed in battlelog if it won't stream. If the server is not connected to the backend UCON will not work. , i am waiting on a fix which is coming soon for the backend, np as long as thats all it is i will come back after the fix. One last thing how do i change my information on my account like tags and team name i would like it changed but am unable to do it? Thanks. make a post here about account changes http://www.pbbans.com/forums/account-questions-and-troubleshooting-private-f553.html Quote Link to comment Share on other sites More sharing options...
HSMagnet Posted October 25, 2011 Share Posted October 25, 2011 Link still seems dead? My server appears just fine in battlelog. I'm pretty sure that if my server shows as Inactive, that an admin has already approved it? Here is what I currently have in my pbsv.cfg... ; ******************************************* ; PBBans.com PBSV Config ; Battlefield 3 ; Last Updated Oct 7th 2011 ; ******************************************* ; ------------------------------ ; General Settings ; ------------------------------ pb_sv_MsgPrefix "PunkBuster Server" pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)] pb_sv_MaxSendRate 8 // [speed at which PB Server sends pbcl and pbag updates in KBps (default=8)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_DupNameGrace 0 //[seconds] pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)] ; ------------------------------ ; Other Settings ; ------------------------------ pb_sv_Restrictions 1 //[Kick for Restrictions 0=No, 1=Yes (default=1) 2=key macro Restrictions] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_ChangePeriod 600 // For pb_sv_ChangeMax pb_sv_ChangeMax 5 // [Max name changes allowed in pb_sv_ChangePeriod] ex 5 changes in 600 seconds ; ------------------------------ ; Kick Settings ; ------------------------------ pb_sv_KickLen 5 //[Minutes (default=2)] pb_sv_ScoreKick 0 //[Min score (negative) ] pb_sv_UpdateGrace 2400 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 10 //[seconds to wait before No GUID kick] ; ------------------------------ ; PBSS Settings ; ------------------------------ pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 1000 //[High screenshot filename serial #] pb_sv_AutoSsFrom 200 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 600 //[Max # of seconds to wait before requesting next ss] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 3 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 300 //[seconds] ; ------------------------------ ; Web Tool Settings ; ------------------------------ pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpKey "" //[Password] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" // pb_sv_HttpColBack2 "808080" // pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)] ; ------------------------------ ; MD5 Tool Settings ; ------------------------------ pb_sv_md5toolfreq 50 // [Reducing this will increase the scan frequency that can cause lag and also increases the chances being kicked for Ignoring MD5 Tool Queries.] ; ------------------------------ ; Alias Settings (Only for supported games) ; ------------------------------ pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] ; ------------------------------ ; PB Tasks (pb_sv_task [start delay (seconds)] [repeat (seconds)] [command]) ; ------------------------------ pb_sv_task 0 7200 pb_sv_ver // Keep-Alive for PBBans Hub (Do not remove. Will cause servers to appear as inactive when empty for long periods of time) pb_sv_task 0 86400 pb_sv_update // Check for PB updates daily (More dependable than UCON system) ; ------------------------------ ; Badname List (pb_sv_badname [grace_period_secs] [disallowed text]) ; ------------------------------ pb_sv_badnameempty ;pb_sv_badname 10 server // Sample ; ------------------------------ ; IP Guard ; ------------------------------ ;pb_sv_ipguard 128.0.0.1 // Sample ; ------------------------------ ; Protected Tags ; ------------------------------ pb_sv_protecttag 1 PBSTAFF pb_sv_protecttag 1 PBBans ; ------------------------------ ; Load Ban List ; ------------------------------ pb_sv_banempty pb_sv_banload ; ------------------------------ ; Load IP Bans ; ------------------------------ ;pb_sv_banmask "128.0.0.1" // Sample ; ------------------------------ ; PB UCON Settings / Lists ; ------------------------------ pb_sv_usessionlimit 10 pb_sv_ucontimeout 300 pb_sv_uconempty pb_sv_uconadd 1 208.122.49.138 "pbbhub1" "pbbanshub" ; ------------------------------ ; PB UCON Ignore List (Prevents UCON users from sending various commands) ; ------------------------------ pb_sv_uconignoreempty pb_sv_uconignore admin.shutdown pb_sv_uconignore pb_sv_md5toolfreq pb_sv_uconignore pb_sv_guidrelax ; ------------------------------ ; Exec Configs ; ------------------------------ pb_sv_load pbsvuser.cfg pb_sv_load pbsvlog.cfg ; ------------------------------ ; Misc ; ------------------------------ pb_sv_writecfg pbucon.use // Enables UCON in case the server removes the file for any reason. pb_sv_load messages.cfg EDIT: Bah! Sorry for the long code! Is there a way to enable scroll via BBcode? use [spoiler] [/spoiler] double check your IP:port as that one does not show in gameTracker Quote Link to comment Share on other sites More sharing options...
TimSad Posted October 25, 2011 Share Posted October 25, 2011 use [spoiler] [/spoiler] double check your IP:port as that one does not show in gameTracker Ahah! Thanks for helping me realize that I used the Admin Command port rather than the Game port. Hehe! You rock! Quote Link to comment Share on other sites More sharing options...
juxtapuh Posted November 8, 2011 Share Posted November 8, 2011 long time reader, first time poster... can someone check what i did wrong? Pinebox Ministries 72.5.195.55:25200 NFO chicago server. i did the auto and it reported this: NIT] Opening connection ...[MSG] Connection opened [MSG] Checking PB version ( pb_sv_ver ) [RESP] Server replied: PunkBuster Server: PunkBuster Server for BF3 (v1.839 | A1386 C2.279) Enabled [MSG] Checking present ucon profiles ( pb_sv_uconlist ) [RESP] Server replied: PunkBuster Server: [slot] [Type] [Mask] [Name] PunkBuster Server: End of PB UCON Profile List (0 Entries) [MSG] No ucon profiles were found [MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use ) [MSG] Server replied: PunkBuster Server: Config File written to c:\servers\stfubf332\bf3\pb\pbucon.use [MSG] Restarting PB ( pb_sv_restart ) [MSG] Waiting 30 seconds for PB to restart [MSG] Setting sessions limit ( pb_sv_usessionlimit 8 ) [RESP] Server replied: PunkBuster Server: pb_sv_SsNext = 242169 (0 to 999999) [MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub ) [MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 ) [RESP] Server replied: PunkBuster Server: PB Log File c:\servers\stfubf332\bf3\pb\svlogs\00000052.log Opened for BF3 (w) [MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver ) [RESP] Server replied: PunkBuster Server: PB Scheduled Task Added: 0 3600 pb_sv_ver [MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg ) [RESP] Server replied: PunkBuster Server: Config File written to c:\servers\stfubf332\bf3\pb\pbsv.cfg [MSG] No error occured during setup. Server should be ready to stream [MSG] Closing connection ... [MSG] Connection closed <br clear="all"> ..also, and this has nothing to do with PB, but i cannot get Gametracker to recognize the server. shows in battlelog, runs fullup with people nightly. left a post on their forums, but to no avail. thanks for the help. Quote Link to comment Share on other sites More sharing options...
Everson Posted November 8, 2011 Share Posted November 8, 2011 Please see: http://www.pbbans.com/forums/streaming-outage-nov-6-2011-t149794.html Quote Link to comment Share on other sites More sharing options...
juxtapuh Posted November 8, 2011 Share Posted November 8, 2011 Please see: http://www.pbbans.com/forums/streaming-outage-nov-6-2011-t149794.html yessir, i see that. i checked on the master list and its not listed there. if this is due to the outage, then i apologize and will just check back in a day or so. in the short of it, did i do everything proper, or did i miss a step (as it was a few days ago). is there a way to check that i did everything right, or do i just need to wait until streaming is back online? thank you for your prompt response and understanding. Quote Link to comment Share on other sites More sharing options...
fozzer Posted November 8, 2011 Share Posted November 8, 2011 Run the automated hub set up again if your servers are still not streaming; http://www.pbbans.com/automated-streaming-setup.html Quote Link to comment Share on other sites More sharing options...
juxtapuh Posted November 8, 2011 Share Posted November 8, 2011 (edited) thank you for the assistance. got it running, time to go bust some punks. Edited November 8, 2011 by juxtapuh Quote Link to comment Share on other sites More sharing options...
fozzer Posted November 8, 2011 Share Posted November 8, 2011 thank you for the assistance. got it running, time to go bust some punks. Not without a team account you wont :P http://www.pbbans.com/streaming-application.html Quote Link to comment Share on other sites More sharing options...
juxtapuh Posted November 10, 2011 Share Posted November 10, 2011 Not without a team account you wont :P http://www.pbbans.com/streaming-application.html im so lost. i used the automated streaming setup tool. are there more steps? i really dont want to screw this up and i REALLY dont want hackers running amuck in our clan server. i now ask for help... again. we have an active clan website, with clan roster. i have the server setup and streaming. i cant complete the link you posted. errors to :"You are already attached to Account #11822" Quote Link to comment Share on other sites More sharing options...
juxtapuh Posted November 11, 2011 Share Posted November 11, 2011 two chefs, one kitchen. lulz. my clanmate has already setup the team... we are all good. bans are streaming, and the hub is updating. Quote Link to comment Share on other sites More sharing options...
fozzer Posted November 11, 2011 Share Posted November 11, 2011 All's well that ends well :P Quote Link to comment Share on other sites More sharing options...
BobyTT Posted November 16, 2011 Share Posted November 16, 2011 All's well that ends well :P So in order my BF3 server to stream, i have to apply for streaming and to run the setup correct? Quote Link to comment Share on other sites More sharing options...
HSMagnet Posted November 16, 2011 Share Posted November 16, 2011 yes an approved team account is a prerequisite to streaming Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.