Cell666 Posted October 27, 2011 Share Posted October 27, 2011 I've set up several server down the years for streaming, Crysis, Crysis Wars, BC2 etc but for the life of me I can't get our new BF3 to stream. I've used the online auto-config, end message is that the server is ready to stream etc, server is approved and nothing. With the inability to read any logs in Clanforge it doesn't help as I can't see whats going on. Any suggestions please ? Quote Link to comment Share on other sites More sharing options...
fozzer Posted October 27, 2011 Share Posted October 27, 2011 All none streaming issues are client side. Once you get the streaming initiation commands correct streaming will kick in instantly. If the automated streaming process is not working for you, try another process; http://www.pbbans.com/info-center-hubguide.html#frostbitercon http://www.pbbans.com/info-center-hubguide.html#frostbitegui If streaming is still not happening, raise a ticket with your GSP and ask them if they can sort things out for you, MPUK have had a lot of experience re none streaming issues :P Quote Link to comment Share on other sites More sharing options...
Cell666 Posted October 27, 2011 Author Share Posted October 27, 2011 I've ended up sending a ticket it, can't get it to work at all....doing me swede in :) Quote Link to comment Share on other sites More sharing options...
surfy Posted October 27, 2011 Share Posted October 27, 2011 Try the manual approach ;) http://www.pbbans.com/forums/multiplaycouk-t147868.html/page__view__findpost__p__383859 Quote Link to comment Share on other sites More sharing options...
surfy Posted October 28, 2011 Share Posted October 28, 2011 Any luck with this Cell? I can take a look for you if you need, just contact me via PM. Multiplay servers are always fun ;) Quote Link to comment Share on other sites More sharing options...
Cell666 Posted October 29, 2011 Author Share Posted October 29, 2011 Surfy, nope had a ticket back from MPUK and spoke to liv3d who I know. They couldn't see anything wrong. Heres the pbucon can you see anything wrong ? ;Auto Generated by PunkBuster Server ; Some of the following settings may not apply, ; consult manuals at evenbalance.com for full documentation pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)] pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)] pb_sv_KickLen 2 //[Minutes (default=2)] pb_sv_CvarFreq 6 //[# of range checks per minute] pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither] pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists] pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)] pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 100 //[High screenshot filename serial #] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 320 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 240 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] pb_sv_AutoSsFrom 60 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss] pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)] pb_sv_ssLogging 0 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 0 //[seconds] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpKey "" //[Key] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_ScoreKick 0 //[Min score (negative)] pb_sv_ChangePeriod 999 //[seconds] pb_sv_ChangeMax 1 //[Max name changes allowed] pb_sv_DupNameGrace 0 //[seconds] pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)] pb_sv_ExtChar 1 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" // pb_sv_HttpColBack2 "808080" // pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)] pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_UpdateGrace 600 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 1 //[seconds to wait before No GUID kick] pb_sv_AliasFn "" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text] ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)] pb_sv_cvarempty ;PB UCON Settings / Lists pb_sv_usessionlimit 10 pb_sv_ucontimeout 300 pb_sv_uconempty pb_sv_uconadd 1 208.122.49.138 "pbbhub1" "pbbanshub" Quote Link to comment Share on other sites More sharing options...
SuperTaz Posted October 29, 2011 Share Posted October 29, 2011 The first two may not be necessary, but, the last highlighted one is. You're missing a few items on the bottom highlighted in red: pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists) ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text] ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)] pb_sv_cvarempty ;PB UCON Settings / Lists pb_sv_usessionlimit 8 pb_sv_ucontimeout 300 pb_sv_uconmaxsendrate 16 pb_sv_uconempty pb_sv_uconadd 1 "208.122.49.138" "pbbhub1" "pbbanshub" pb_sv_uconignoreempty So, your pb config should look something like this and you can copy and paste this code right into your server, and restart PB or the server and you should be able to stream. ;Auto Generated by PunkBuster Server ; Some of the following settings may not apply, ; consult manuals at evenbalance.com for full documentation pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)] pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)] pb_sv_KickLen 2 //[Minutes (default=2)] pb_sv_CvarFreq 6 //[# of range checks per minute] pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither] pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists] pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)] pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 100 //[High screenshot filename serial #] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] pb_sv_AutoSsFrom 60 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss] pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)] pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 0 //[seconds] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpKey "" //[Key] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_ScoreKick 0 //[Min score (negative)] pb_sv_ChangePeriod 999 //[seconds] pb_sv_ChangeMax 1 //[Max name changes allowed] pb_sv_DupNameGrace 0 //[seconds] pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)] pb_sv_ExtChar 1 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" // pb_sv_HttpColBack2 "808080" // pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)] pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_UpdateGrace 600 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 1 //[seconds to wait before No GUID kick] pb_sv_AliasFn "" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists) ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text] ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)] pb_sv_cvarempty ;PB UCON Settings / Lists pb_sv_usessionlimit 10 pb_sv_ucontimeout 300 pb_sv_uconmaxsendrate 16 pb_sv_uconempty pb_sv_uconadd 1 208.122.49.138 "pbbhub1" "pbbanshub" pb_sv_uconignoreempty Quote Link to comment Share on other sites More sharing options...
Cell666 Posted October 29, 2011 Author Share Posted October 29, 2011 Well all them entries are from the auto config on here :( I've added the extra entries and still nada...boohoo lol It's not helping with MPUK not allowing log access which Dice have said we can have, can't see whats going on at all. Quote Link to comment Share on other sites More sharing options...
Cell666 Posted October 29, 2011 Author Share Posted October 29, 2011 (edited) oh hang on I detect a operator error. d'oh Which port should it be set to ? I've currently have the Admin/Query port Address85.236.100.33:19867Query Port19877Admin Port19877PunkBuster Port19962 Edit:actually I know its the right port as the automated config worked. Edited October 29, 2011 by Cell666 Quote Link to comment Share on other sites More sharing options...
surfy Posted October 29, 2011 Share Posted October 29, 2011 To add a server to the hub always use the join port, to run the webtool its the admin/rcon port. I added the server IP and Join port for you and here's the result: ---------- Account Information ---------- Team: BUTTKICKERS ([-BK-]) Website: www.buttkickers.eu Account ID: 9294 Streaming Status: Streaming (1 / 2) ---------- Server List ---------- BF3 - 85.236.100.33:19867 (Streaming) BF3 - 85.236.100.33:19877 You can remove the server that's not currently streaming if you like :) Quote Link to comment Share on other sites More sharing options...
Cell666 Posted October 29, 2011 Author Share Posted October 29, 2011 oh thats why then....d'oh Thanks for your help guys (and gals). I'm getting too old for this lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.