Having trouble setting up BC2 server for streaming.

[soak]

Ok.. I ran the Automated Hub Set up and it appeared to be set up successfully. I've added my server under the Server Management section. I still cannot get the server to stream. All queries state it is not streaming. I'm wondering if I used the wrong port. The server is setup as, 68.232.161.237:19567. I was going to try and change it thru the Modify option but I'm unable to modify the ip/port info. Then I thought about deleting the server and starting over but there is a statement in bold red text to contact an admin before I go that route. Can an admin please verify I have the correct port and give me an idea on what I should try next. BTW, gameservers.com is my GSP if that matters.

 

Results of the Automated Hub Setup:

 

[iNIT] Opening connection ...

[MSG] Connection opened

[MSG] Remote console driver does not return result. Performing blind setup.

[MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use )

[MSG] Restarting PB ( pb_sv_restart )

[MSG] Waiting 30 seconds for PB to restart

[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )

[MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub )

[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )

[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )

[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )

[MSG] No error occured during setup. Server should be ready to stream

[MSG] Closing connection ...

[MSG] Connection closed

 

Thanks in advance.

[Everson]

Server on Team Account:

 

68.232.161.23:19567 (BFBC2)

 

Your Server:

 

 

You've typo'd the IP Address on your Team Account, remove it and add the correct one ;)

[nico86326]

Server on Team Account:

 

68.232.161.23:19567 (BFBC2)

 

Your Server:

 

 

You've typo'd the IP Address on your Team Account, remove it and add the correct one

 

 

K Radiation I seem to be having the same trouble.

 

IP address is 8.3.7.28:19567 Query 48888

 

 

I had a BF2142 server that was streaming but deleted it cuz its no longer in use. Because of that I lost my Admin priviledges on the website.

Any how, I tried the Auto Hub and this is the result I get

[iNIT] Opening connection ...

[MSG] Connection opened

[MSG] Remote console driver does not return result. Performing blind setup.

[MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use )

[MSG] Restarting PB ( pb_sv_restart )

[MSG] Waiting 30 seconds for PB to restart

[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )

[MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub )

[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )

[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )

[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )

[MSG] No error occured during setup. Server should be ready to stream

[MSG] Closing connection ...

 

yet when I check to see if it is streaming it still tells me no. I entered the info over 48 hours ago...

 

You have any ideas

thanks

Nic

[soak]

Server on Team Account:

 

68.232.161.23:19567 (BFBC2)

 

Your Server:

 

 

You've typo'd the IP Address on your Team Account, remove it and add the correct one ;)

 

OMG!!! I've been messing with this for hours!!lol It's amazing what a second set of eyes can find. Thanks. I'll give it another shot.

[(FG) mastermc0]

K Radiation I seem to be having the same trouble.

 

IP address is 8.3.7.28:19567 Query 48888

 

 

I had a BF2142 server that was streaming but deleted it cuz its no longer in use. Because of that I lost my Admin priviledges on the website.

Any how, I tried the Auto Hub and this is the result I get

[iNIT] Opening connection ...

[MSG] Connection opened

[MSG] Remote console driver does not return result. Performing blind setup.

[MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use )

[MSG] Restarting PB ( pb_sv_restart )

[MSG] Waiting 30 seconds for PB to restart

[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )

[MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub )

[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )

[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )

[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )

[MSG] No error occured during setup. Server should be ready to stream

[MSG] Closing connection ...

 

yet when I check to see if it is streaming it still tells me no. I entered the info over 48 hours ago...

 

You have any ideas

thanks

Nic

 

I believe it won't actually show up on PBBans as streaming until you create a team account and add it.

[fozzer]

K Radiation I seem to be having the same trouble.

 

IP address is 8.3.7.28:19567 Query 48888

 

 

I had a BF2142 server that was streaming but deleted it cuz its no longer in use. Because of that I lost my Admin priviledges on the website.

Any how, I tried the Auto Hub and this is the result I get

[iNIT] Opening connection ...

[MSG] Connection opened

[MSG] Remote console driver does not return result. Performing blind setup.

[MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use )

[MSG] Restarting PB ( pb_sv_restart )

[MSG] Waiting 30 seconds for PB to restart

[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )

[MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub )

[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )

[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )

[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )

[MSG] No error occured during setup. Server should be ready to stream

[MSG] Closing connection ...

 

yet when I check to see if it is streaming it still tells me no. I entered the info over 48 hours ago...

 

You have any ideas

thanks

Nic

Here is your team account details;

 

***************************************************************
Team: Knight Hawks (=KH=, [KH])
Account ID: 9161
Streaming Status: Not Streaming (0 / 1)
***************************************************************

---------------------------------------------------------------
Server List
---------------------------------------------------------------
BFBC2 - 8.3.7.28:19657

---------------------------------------------------------------
User List
---------------------------------------------------------------
nico86326 (151291)

 

Please note the submitted server port :)

 

Solution:

Completely delete the server from your team account and add the correct server address.

[nico86326]

Here is your team account details;

 

***************************************************************
Team: Knight Hawks (=KH=, [KH])
Account ID: 9161
Streaming Status: Not Streaming (0 / 1)
***************************************************************

---------------------------------------------------------------
Server List
---------------------------------------------------------------
BFBC2 - 8.3.7.28:19657

---------------------------------------------------------------
User List
---------------------------------------------------------------
nico86326 (151291)

 

Please note the submitted server port

 

Solution:

Completely delete the server from your team account and add the correct server address.

 

K fozzer... Change has been made...

Like momma always said..better to have four eyes than two.

Thanks for catching the mistake.

How long can I expect the server to start streaming after I auto hub?

 

Nic

[fozzer]

Rather than wait for the auto updater to kick in, I manually updated you to SGA.

Server is streaming nicely :)