189.1.162.60:16567 not streaming

[Burningpunk]

Hello,

 

I tried to manually configure the server following this guide ( http://www.pbbans.com/forums/hub-streaming-fixsetup-via-rcon-t29047.html ) and also tried to use the automated hub tool ( http://www.pbbans.com/automated-streaming-setup.html ) but the server is still not streaming.

 

Could you please help?

 

Regards,

Burning

[HSMagnet]

0 server(s) found for 189.1.162.60:16567

 

first problem - that is not a BC2 server. typo on port?

 

 

second - do you have a team account here?

 

*edit*

 

found where you had it streaming before

 

i would restart server and or check with your GSP

Edited May 16, 2010 by HSMagnet

[Everson]

It's a BF2 server, not BC2.

 

@OP: Ensure PB is running and if still not worked after the automated hub, copy the output of it here.

[HSMagnet]

It's a BF2 server, not BC2.

 

@OP: Ensure PB is running and if still not worked after the automated hub, copy the output of it here.

 

oops

 

good catch

 

and advice

[fozzer]

http://www.pbbans.com/info-center-hubguide.html#bf2cc

[Burningpunk]

It's a BF2 server, not BC2.

 

@OP: Ensure PB is running and if still not worked after the automated hub, copy the output of it here.

 

Ok, PB is running and I'v just tried the automated hub setup again, here goes the result:

 

I assure that:

 

Game is set to Battlefield 2

Server IP is 189.1.162.60

Rcon port is 4711

And typed the correct Rcon password....

 

 

[iNIT] Opening connection ...

[MSG] Connection opened

[MSG] Remote console driver does not return result. Performing blind setup.

[MSG] Creating pbucon.use file ( pb_sv_writecfg pbucon.use )

[MSG] Restarting PB ( pb_sv_restart )

[MSG] Waiting 30 seconds for PB to restart

[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )

[MSG] Adding ucon profile for PBBans Hub ( pb_sv_uconadd 1 208.122.49.138 pbbhub1 pbbanshub )

[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )

[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )

[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )

[MSG] No error occured during setup. Server should be ready to stream

[MSG] Closing connection ...

[MSG] Connection closed

...and still not streaming....

 

http://www.pbbans.com/info-center-hubguide.html#bf2cc

 

 

...and I just did what fozzer mentioned above but the server still shows as not streaming...

 

 

[fozzer]

All none streaming issues are client side.

 

This seems like a corrupt install of PB.

Raise a ticket with your host and ask for a fresh install of a fully updated PB.