ΞRRΞRockΞ Posted January 11, 2008 Share Posted January 11, 2008 hi my ip has same promblem ... set it up threw rcon says its running..but does say in master stream index Server StatusServer is not streaming via Hub Quote Link to comment Share on other sites More sharing options...
fozzer Posted January 11, 2008 Share Posted January 11, 2008 [quote name='╪R Quote Link to comment Share on other sites More sharing options...
RoadWarrior Posted January 11, 2008 Share Posted January 11, 2008 I spilt the tpoc because of the difference in games. COD4 is much different than BF2 or BF2142, so it merits the task here. Hope to see you streaming soon, if you've not got up and running yet. Quote Link to comment Share on other sites More sharing options...
ΞRRΞRockΞ Posted January 11, 2008 Author Share Posted January 11, 2008 ok 3 toimes i have entered the command lines one at a time..still says not streaming? Quote Link to comment Share on other sites More sharing options...
RoadWarrior Posted January 11, 2008 Share Posted January 11, 2008 Could try this method if you haven't already. 1. Unzip and upload both pbucon.use and pbsv.cfg from the method 1 folder to your server PB folder. 2. Restart PB with pb_sv_restart or restart your server 4. Post your serverIP/Port as the topic title,state it's for the PBBans Hub, game server type (Ie BF2 or CoD2) and clantag. example: Topic Title: 81.132.85.17:27962 Hub RTCW ::llama:: To verify, after restarting PB type pb_sv_uconlist in rcon, it should give the following response: PunkBuster Client: [slot] [Type] [Mask] [Name] PunkBuster Client: 1 1 64.27.21.46 pbbanshub PunkBuster Client: End of PB UCON Profile List (1 Entry) Remember you do NOT have to download anything else besides the pbbans_hub_cfg.zip file Quote Link to comment Share on other sites More sharing options...
ΞRRΞRockΞ Posted January 11, 2008 Author Share Posted January 11, 2008 thanks but already have this responce from server... PunkBuster Client: [slot] [Type] [Mask] [Name] PunkBuster Client: 1 1 64.27.21.46 pbbanshub PunkBuster Client: End of PB UCON Profile List (1 Entry) so i guess its installed? Quote Link to comment Share on other sites More sharing options...
ΞRRΞRockΞ Posted January 11, 2008 Author Share Posted January 11, 2008 also this is my current pb config that am runnking is it correct? Auto Generated by PunkBuster Server ; Some of the following settings may not apply, ; consult manuals at evenbalance.com for full documentation pb_sv_MsgPrefix "^5PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)] pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)] pb_sv_MaxConDls 6 //[Concurrent downloads (default=1)] pb_sv_KickLen 5 //[Minutes (default=2)] pb_sv_CvarFreq 6 //[# of range checks per minute] pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither] pb_sv_CvarWalk 0 //[0=disabled, 1-4=Walk through obtained Cvar lists] pb_sv_CvarUserPulse 20 //[Frequency to auto-send CvarUser (minutes)] pb_sv_CvarChangedPulse 20 //[Frequency to auto-send CvarChanged (minutes)] pb_sv_CQC 1 //[0=No, 1=Yes (default=1)] pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)] pb_sv_SsFloor 1 //[Low screenshot filename serial #] pb_sv_SsCeiling 2000 //[High screenshot filename serial #] pb_sv_SsCmd "" //[Filename of system command to run after screenshots] pb_sv_SsWidth 400 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 204 //[Requested pixel height of remote screenshots] pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots] pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots] pb_sv_SsSrate 1 //[sample Rate for remote screenshots] pb_sv_SsDelay 0 //[Maximum delay client waits before capturing screenshot] pb_sv_SsPath "" //[Path where remote screenshots are saved] pb_sv_AutoSsFrom 300 //[Min # of seconds to wait before requesting next ss] pb_sv_AutoSsTo 1200 //[Max # of seconds to wait before requesting next ss] pb_sv_AutoSs 0 //[0=No, 1=Yes (default=0)] pb_sv_ssLogging 3 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither] pb_sv_ssTimeout 300 //[seconds] pb_sv_Sleep 60 //[# of Milliseconds (default=60)] pb_sv_PowerMin 10 //[Power Points] pb_sv_PowerDef 1 //[Power Points] pb_sv_PowerKickLen 5 //[Minutes (default=5)] pb_sv_HttpPort 0 //[Port #] pb_sv_HttpAddr "" //[External IP Address] pb_sv_HttpRefresh 30 //[seconds] pb_sv_HttpKey "" //[Key] pb_sv_HttpMaps "" //[Map list (separate by spaces)] pb_sv_ScoreKick 0 //[Min score (negative)] pb_sv_ChangePeriod 300 //[seconds] pb_sv_ChangeMax 5 //[Max name changes allowed] pb_sv_DupNameGrace 0 //[seconds] pb_sv_AutoUpdBan 1 //[0=No, 1=Yes (default=0)] pb_sv_ExtChar 0 //[0=No, 1=Yes (default=0)] pb_sv_GuidRelax 0 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)] pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)] pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool] pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)] pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)] pb_sv_HttpColBack1 "000000" // pb_sv_HttpColBack2 "808080" // pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)] pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)] pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)] pb_sv_HttpShowGuid 1 //[0=No, 1=Yes (default=0)] pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)] pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename] pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)] pb_sv_LogFloor 1 //[Low log filename serial #] pb_sv_MinName 0 //[Min Characters in Player name (default=0)] pb_sv_MaxName 0 //[Max Characters in Player name (default=0)] pb_sv_LanMask "" //[iP Address Mask for LAN Players (default=)] pb_sv_Lan 0 //[0=No, 1=Yes (default=0)] pb_sv_UpdateGrace 2400 //[seconds to wait before Update Failure kick] pb_sv_NoGuidGrace 10 //[seconds to wait before No GUID kick] pb_sv_AliasFn "pbalias.dat" //[Filename (default="pbalias.dat")] pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)] pb_sv_AliasMax 10 //[Max # of Aliases to track for each PB GUID] pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)] pb_sv_load pbsvlog.cfg //load remote logging settings (if pbsvlog.cfg exists) ;Badname List - pb_sv_badname [grace_period_secs] [disallowed text] ;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)] pb_sv_cvarempty ;PB UCON Settings / Lists pb_sv_usessionlimit 3 pb_sv_ucontimeout 90 pb_sv_uconempty pb_sv_uconignoreempty Quote Link to comment Share on other sites More sharing options...
Benway Posted January 11, 2008 Share Posted January 11, 2008 [quote name='╪R Quote Link to comment Share on other sites More sharing options...
ΞRRΞRockΞ Posted January 11, 2008 Author Share Posted January 11, 2008 ok copyed and pasted your config saved it and restarted server...still no streaming acording check server streaming? i noticed this command is differnt in your config i assumed u wanted me to try?....pb_sv_task 10 3600 pb_sv_ver mine was pb_sv_task 0 7200 pb_sv_ver which should i have? Quote Link to comment Share on other sites More sharing options...
Benway Posted January 11, 2008 Share Posted January 11, 2008 doesnt matter. what is the server echo to pb_sv_ver ? Quote Link to comment Share on other sites More sharing options...
ΞRRΞRockΞ Posted January 11, 2008 Author Share Posted January 11, 2008 echo? Quote Link to comment Share on other sites More sharing options...
=BLACKWOLF= Posted January 11, 2008 Share Posted January 11, 2008 [quote name='╪R Quote Link to comment Share on other sites More sharing options...
ΞRRΞRockΞ Posted January 11, 2008 Author Share Posted January 11, 2008 c for yourself...lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.